Improving the efficiency of solar cells by upconverting sunlight using field enhancement from optimized nano structures

Research output: Contribution to journalJournal article – Annual report year: 2018Researchpeer-review

  • Author: Balling, P

    Aarhus University, Denmark

  • Author: Christiansen, J.

    Aarhus University, Denmark

  • Author: Christiansen, R. E.

    Solid Mechanics, Department of Mechanical Engineering, Technical University of Denmark, Nils Koppels Allé, 2800, Kgs. Lyngby, Denmark

  • Author: Eriksen, E. D.

    Aarhus University, Denmark

  • Author: Lakhotiya, H.

    Aarhus University, Denmark

  • Author: Mirsafaei, M.

    University of Southern Denmark, Denmark

  • Author: Møller, S. H.

    Aarhus University, Denmark

  • Author: Nazir, A.

    Aarhus University, Denmark

  • Author: Vester-Petersen, Joakim

    Aarhus University, Denmark

  • Author: Jeppesen, B.R.

    Aarhus University, Denmark

  • Author: Jensen, P. B.

    Aarhus University, Denmark

  • Author: Hansen, J. L.

    Aarhus University, Denmark

  • Author: Ram, S. K.

    Aarhus University, Denmark

  • Author: Sigmund, O.

    Solid Mechanics, Department of Mechanical Engineering, Technical University of Denmark, Nils Koppels Allé, 2800, Kgs. Lyngby, Denmark

  • Author: Madsen, M.

    University of Southern Denmark, Denmark

  • Author: Madsen, S. P.

    Aarhus University, Denmark

  • Author: Julsgaard, B.

    Aarhus University, Denmark

View graph of relations

Spectral conversion of the sunlight has been proposed as a method for enhancing the efficiency of photovoltaicvdevices, which are limited in current production by the mismatch between the solar spectrum and the wavelength range for efficient carrier generation. For example, the photo current can be increased by conversion of two low-energy photons (below the band gap of the absorber) to one higher-energy photon (i.e. upconversion). In this paper, we will review our ongoing activities aimed at enhancing such spectral-conversion processes by employing appropriately designed plasmonic nanoparticles. The nanoparticles serve as light-concentrating elements in order to enhance the non-linear upconversion process. From the theoretical side, we approach the optimization of nanoparticles by finite-element modelling of the plasmonic near fields in combination with topological optimization of the particle geometries. Experimentally, the nanostructures are formed by electronbeam lithography on thin films of Er3+-containing transparent materials, foremost TiO2 made by radio-frequency magnetron sputtering, and layers of chemically synthesized NaYF4 nanoparticles. The properties of theupconverter are measured using a variety of optical methods, including time-resolved luminescence spectroscopy on erbium transitions and spectrally resolved upconversion-yield measurements at ∼1500-nm-light excitation.The calculated near-field enhancements are validated using a technique of near-field-enhanced ablation by tunable, ultrashort laser pulses.
Original languageEnglish
JournalOptical Materials
Volume83
Pages (from-to)279-289
ISSN0925-3467
DOIs
Publication statusPublished - 2018
CitationsWeb of Science® Times Cited: No match on DOI

    Research areas

  • Upconversion, Photovoltaics, Plasmonic enhancement

ID: 149828578