Improved reverse osmosis thin film composite biomimetic membranes by incorporation of polymersomes

Research output: Contribution to journalJournal article – Annual report year: 2020Researchpeer-review

Standard

Improved reverse osmosis thin film composite biomimetic membranes by incorporation of polymersomes. / Górecki, Radosław Pawel; Reurink, Dennis Maik; Khan, Muntazim Munir; Sanahuja-Embuena, Victoria; Trzaskuś, Krzysztof; Hélix-Nielsen, Claus.

In: Journal of Membrane Science, Vol. 593, 117392, 2020.

Research output: Contribution to journalJournal article – Annual report year: 2020Researchpeer-review

Harvard

APA

CBE

MLA

Vancouver

Author

Bibtex

@article{6a65c1a3000f4d1b8d905e9d86c10572,
title = "Improved reverse osmosis thin film composite biomimetic membranes by incorporation of polymersomes",
abstract = "Biomimetic aquaporin-based membranes offer great promise as a disruptive water treatment technology, due to their potential of improving membrane permeability without compromising solute rejection. However, fabrication upscaling is challenging and therefore the technological potential of biomimetic membranes remains unused. We propose an easily upscalable process based on bulk hydration of diblock and triblock copolymer mixture for preparation of polymersomes which can reconstitute aquaporin proteins. Such polymersomes are incorporated into biomimetic membranes via polyamide active layer synthesis based on interfacial polymerization. By incorporation of blank polymersomes, it was possible to improve water permeability of the membrane by 30{\%}, and by incorporation of aquaporin reconstituting polymersomes by 50{\%}, compared to the membranes without polymersomes. In both cases NaCl rejection was not affected. X-ray photoelectron spectroscopy measurements confirmed incorporation of copolymers prepared with aquaporins into the active polyamide layer without affecting the thickness of the membrane's active layer and surface zeta-potential.",
keywords = "Aquaporin, Block copolymers, Polymersomes, Interfacial polymerization, Biomimetic membrane",
author = "G{\'o}recki, {Radosław Pawel} and Reurink, {Dennis Maik} and Khan, {Muntazim Munir} and Victoria Sanahuja-Embuena and Krzysztof Trzaskuś and Claus H{\'e}lix-Nielsen",
year = "2020",
doi = "10.1016/j.memsci.2019.117392",
language = "English",
volume = "593",
journal = "Journal of Membrane Science",
issn = "0376-7388",
publisher = "Elsevier",

}

RIS

TY - JOUR

T1 - Improved reverse osmosis thin film composite biomimetic membranes by incorporation of polymersomes

AU - Górecki, Radosław Pawel

AU - Reurink, Dennis Maik

AU - Khan, Muntazim Munir

AU - Sanahuja-Embuena, Victoria

AU - Trzaskuś, Krzysztof

AU - Hélix-Nielsen, Claus

PY - 2020

Y1 - 2020

N2 - Biomimetic aquaporin-based membranes offer great promise as a disruptive water treatment technology, due to their potential of improving membrane permeability without compromising solute rejection. However, fabrication upscaling is challenging and therefore the technological potential of biomimetic membranes remains unused. We propose an easily upscalable process based on bulk hydration of diblock and triblock copolymer mixture for preparation of polymersomes which can reconstitute aquaporin proteins. Such polymersomes are incorporated into biomimetic membranes via polyamide active layer synthesis based on interfacial polymerization. By incorporation of blank polymersomes, it was possible to improve water permeability of the membrane by 30%, and by incorporation of aquaporin reconstituting polymersomes by 50%, compared to the membranes without polymersomes. In both cases NaCl rejection was not affected. X-ray photoelectron spectroscopy measurements confirmed incorporation of copolymers prepared with aquaporins into the active polyamide layer without affecting the thickness of the membrane's active layer and surface zeta-potential.

AB - Biomimetic aquaporin-based membranes offer great promise as a disruptive water treatment technology, due to their potential of improving membrane permeability without compromising solute rejection. However, fabrication upscaling is challenging and therefore the technological potential of biomimetic membranes remains unused. We propose an easily upscalable process based on bulk hydration of diblock and triblock copolymer mixture for preparation of polymersomes which can reconstitute aquaporin proteins. Such polymersomes are incorporated into biomimetic membranes via polyamide active layer synthesis based on interfacial polymerization. By incorporation of blank polymersomes, it was possible to improve water permeability of the membrane by 30%, and by incorporation of aquaporin reconstituting polymersomes by 50%, compared to the membranes without polymersomes. In both cases NaCl rejection was not affected. X-ray photoelectron spectroscopy measurements confirmed incorporation of copolymers prepared with aquaporins into the active polyamide layer without affecting the thickness of the membrane's active layer and surface zeta-potential.

KW - Aquaporin

KW - Block copolymers

KW - Polymersomes

KW - Interfacial polymerization

KW - Biomimetic membrane

U2 - 10.1016/j.memsci.2019.117392

DO - 10.1016/j.memsci.2019.117392

M3 - Journal article

VL - 593

JO - Journal of Membrane Science

JF - Journal of Membrane Science

SN - 0376-7388

M1 - 117392

ER -