Improved Method for PD-Quantification in Power Cables.

Joachim T. Holbøll, Rasmus Villefrance, Mogens Henriksen

    Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

    Abstract

    n this paper, a method is described for improved quantification of partial discharges(PD) in power cables. The method is suitable for PD-detection and location systems in the MHz-range, where pulse attenuation and distortion along the cable cannot be neglected. The system transfer function was calculated and measured in order to form basis for magnitude calculation after each measurements. --- Limitations and capabilities of the method will be discussed and related to relevant field applications of high frequent PD-measurements. --- Methods for increased signal/noise ratio are easily implemented into the system.
    Original languageEnglish
    Title of host publicationProceedings of 1999 Nordic Insulation Symposium
    Place of PublicationCopenhagen
    PublisherTechnical University of Denmark
    Publication date1999
    Pages69-76
    Publication statusPublished - 1999
    EventNordic Insulation Symposium - Copenhagen, Denmark
    Duration: 14 Jun 199916 Jun 1999

    Conference

    ConferenceNordic Insulation Symposium
    CountryDenmark
    CityCopenhagen
    Period14/06/199916/06/1999

    Cite this

    Holbøll, J. T., Villefrance, R., & Henriksen, M. (1999). Improved Method for PD-Quantification in Power Cables. In Proceedings of 1999 Nordic Insulation Symposium (pp. 69-76). Technical University of Denmark.