Implementation and Validation of IEC Generic Type 1A Wind Turbine Generator Model

Haoran Zhao, Qiuwei Wu, Ioannis Margaris, J. Bech, Poul Ejnar Sørensen, B. Andresen

    Research output: Contribution to journalJournal articleResearchpeer-review

    891 Downloads (Pure)

    Abstract

    This paper presents the implementation of the International Electrotechnical Commission (IEC) generic Type 1A wind turbine generator (WTG) model in Power Factory (PF) and the validation of the implemented model against field measurements. The IEC generic Type 1A WTG model structure is briefly described. The details are explained regarding how the two mass mechanical model is implemented when the generator mass is included in the PF built-in generator model. In order to verify the IEC generic Type 1A WTG model, the model to field measurement validation method was employed. The model to field measurement validation of the implemented model was carried out by using the “play-back” approach and the measurement data from Siemens Wind Power. The results of the model to field measurement validation show that there is a good match between the simulation results and the measurements. The errors between the simulation results and measurements were calculated according to the voltage dip windows and the index definition specified in the IEC 61400-27-1 committee draft. Copyright © 2014 John Wiley & Sons, Ltd.
    Original languageEnglish
    JournalInternational Transactions on Electrical Energy System
    Volume25
    Issue number9
    Pages (from-to)1804–1813
    ISSN2050-7038
    DOIs
    Publication statusPublished - 2015

    Keywords

    • IEC
    • Model Validation
    • Play-back approach
    • Type 1A WTG Model

    Fingerprint

    Dive into the research topics of 'Implementation and Validation of IEC Generic Type 1A Wind Turbine Generator Model'. Together they form a unique fingerprint.

    Cite this