Hot-blade cutting of EPS foam for double-curved surfaces—numerical simulation and experiments

Research output: Contribution to journalJournal article – Annual report year: 2017Researchpeer-review

Standard

Hot-blade cutting of EPS foam for double-curved surfaces—numerical simulation and experiments. / Petkov, Kiril P.; Hattel, Jesper Henri.

In: International Journal of Advanced Manufacturing Technology, Vol. 93, No. 9-12, 2017, p. 4253-4264.

Research output: Contribution to journalJournal article – Annual report year: 2017Researchpeer-review

Harvard

APA

CBE

MLA

Vancouver

Author

Bibtex

@article{a7e4d6e3cfa045ec9e75ff761b71dfea,
title = "Hot-blade cutting of EPS foam for double-curved surfaces—numerical simulation and experiments",
abstract = "In the present paper, experimental and numerical studies of a newly developed process of Hot-Blade Cutting used for free forming of double-curved surfaces and cost effective rapid prototyping of expanded polystyrene foam is carried out. The experimental part of the study falls in two parts. The first presents a number of large-scale cutting samples combining linear cuts with and without inclination measured from the horizontal direction of cutting, while in the second, the thermal phenomena in the process are studied based on infrared measurements of the hot-blade tool made by observation during the cutting process. A novel measurement method for determination of kerfwidth (i.e., the gap space after material removal) applying a commercially available large-scale optical 3D scanning technique was developed and used. A one-dimensional thermo-electro-mechanical numerical model for Hot-Blade Cutting similar to the one previously proposed by Petkov and Hattel (Int J Machine Tools Manuf 107:50–59 2016) for Hot-Wire Cutting of Polystyrene foam is used to simulate the process and describe the effects taking place within the hot-blade during different cutting procedures. The obtained results are graphically presented and discussed in relation to the aim for higher geometrical accuracy of the Hot-Blade Cutting process.",
keywords = "Hot-blade cutting, Kerfwidth, Expanded polystyrene (EPS), Thermo-electro-mechanical modelling",
author = "Petkov, {Kiril P.} and Hattel, {Jesper Henri}",
year = "2017",
doi = "10.1007/s00170-017-0807-y",
language = "English",
volume = "93",
pages = "4253--4264",
journal = "International Journal of Advanced Manufacturing Technology",
issn = "0268-3768",
publisher = "Springer U K",
number = "9-12",

}

RIS

TY - JOUR

T1 - Hot-blade cutting of EPS foam for double-curved surfaces—numerical simulation and experiments

AU - Petkov, Kiril P.

AU - Hattel, Jesper Henri

PY - 2017

Y1 - 2017

N2 - In the present paper, experimental and numerical studies of a newly developed process of Hot-Blade Cutting used for free forming of double-curved surfaces and cost effective rapid prototyping of expanded polystyrene foam is carried out. The experimental part of the study falls in two parts. The first presents a number of large-scale cutting samples combining linear cuts with and without inclination measured from the horizontal direction of cutting, while in the second, the thermal phenomena in the process are studied based on infrared measurements of the hot-blade tool made by observation during the cutting process. A novel measurement method for determination of kerfwidth (i.e., the gap space after material removal) applying a commercially available large-scale optical 3D scanning technique was developed and used. A one-dimensional thermo-electro-mechanical numerical model for Hot-Blade Cutting similar to the one previously proposed by Petkov and Hattel (Int J Machine Tools Manuf 107:50–59 2016) for Hot-Wire Cutting of Polystyrene foam is used to simulate the process and describe the effects taking place within the hot-blade during different cutting procedures. The obtained results are graphically presented and discussed in relation to the aim for higher geometrical accuracy of the Hot-Blade Cutting process.

AB - In the present paper, experimental and numerical studies of a newly developed process of Hot-Blade Cutting used for free forming of double-curved surfaces and cost effective rapid prototyping of expanded polystyrene foam is carried out. The experimental part of the study falls in two parts. The first presents a number of large-scale cutting samples combining linear cuts with and without inclination measured from the horizontal direction of cutting, while in the second, the thermal phenomena in the process are studied based on infrared measurements of the hot-blade tool made by observation during the cutting process. A novel measurement method for determination of kerfwidth (i.e., the gap space after material removal) applying a commercially available large-scale optical 3D scanning technique was developed and used. A one-dimensional thermo-electro-mechanical numerical model for Hot-Blade Cutting similar to the one previously proposed by Petkov and Hattel (Int J Machine Tools Manuf 107:50–59 2016) for Hot-Wire Cutting of Polystyrene foam is used to simulate the process and describe the effects taking place within the hot-blade during different cutting procedures. The obtained results are graphically presented and discussed in relation to the aim for higher geometrical accuracy of the Hot-Blade Cutting process.

KW - Hot-blade cutting

KW - Kerfwidth

KW - Expanded polystyrene (EPS)

KW - Thermo-electro-mechanical modelling

U2 - 10.1007/s00170-017-0807-y

DO - 10.1007/s00170-017-0807-y

M3 - Journal article

VL - 93

SP - 4253

EP - 4264

JO - International Journal of Advanced Manufacturing Technology

JF - International Journal of Advanced Manufacturing Technology

SN - 0268-3768

IS - 9-12

ER -