High-temperature plastic deformation of ⟨110⟩-oriented BaTiO3 single crystals

Marion Höfling*, Lukas Porz, Michael Scherer, Shuang Gao, Fangping Zhuo, Daniel Isaia, Jürgen Rödel

*Corresponding author for this work

Research output: Contribution to journalJournal articleResearchpeer-review

44 Downloads (Pure)

Abstract

BaTiO3 single crystals were deformed in compression along the ⟨ 110⟩ crystal axis to study the plastic deformability and dislocation structures at high temperatures under different loading conditions. The yield strength is determined from stress–strain curves under strain rate control, load control, strain rate cycling tests, and under step-wise loading conditions to elucidate the impact of measurement approach in yield strength behavior. A comparison between the chosen methods based on stress-dependent strain rate plots indicates that load control measurements are a suitable alternative to the commonly used strain rate-control experiments in metals. This allows avoiding overloading and providing an estimate of the overall achievable strain rates in a ceramic. Activation energies and activation volumes in the temperature range of 1100–1170 °C indicate a similar mechanical deformation behavior to SrTiO3
Original languageEnglish
JournalJournal of Materials Research
Volume37
Issue number3
Pages (from-to)737-746
ISSN0884-2914
DOIs
Publication statusPublished - 2022

Fingerprint

Dive into the research topics of 'High-temperature plastic deformation of ⟨110⟩-oriented BaTiO3 single crystals'. Together they form a unique fingerprint.

Cite this