Force analysis in micro milling Al 6082 T6 in various engagement conditions

Giuliano Bissacco; T. Gietzelt; Hans Nørgaard Hansen

Force analysis in micro milling Al 6082 T6 in various engagement conditions

Forschungs Zentrum Karlsruhe GmbH

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

Abstract

This paper discusses the issues related to force measurement in micro milling and presents the results of the experimental investigation performed in an on going Cross Divisional Project within the 4M network of Excellence, aiming at force analysis and process characterization in micro milling. Reliable force measurement in micro milling is shown to be a challenging task. Measured forces are affected by contributions coming from the machining system. Based on the performed measurements, tool engagement has been demonstrated to occur at each tooth passing, even at feeds per tooth as low as 2 μm.

Original language	English
Title of host publication	Proceedings of the 4th International Conference on Multi Material Micro Manufacture (4M)
Publication date	2008
Pages	241-244
Publication status	Published - 2008
Event	4th International Conference on Multi-Material Micro Manufacture - Cardiff, United Kingdom Duration: 9 Sept 2008 → 11 Sept 2008 Conference number: 4 http://www.4m-net.org/Conference/4M2008

Conference

Conference	4th International Conference on Multi-Material Micro Manufacture
Number	4
Country/Territory	United Kingdom
City	Cardiff
Period	09/09/2008 → 11/09/2008
Internet address	http://www.4m-net.org/Conference/4M2008

Keywords

Cutting Force measurem ent
Micro Tools
Micro Milling

OpenUrl availability

Check availability in DTU Findit

Cite this

@inproceedings{1d025af0d6aa4cbca610a62b8ed72283,

title = "Force analysis in micro milling Al 6082 T6 in various engagement conditions",

abstract = "This paper discusses the issues related to force measurement in micro milling and presents the results of the experimental investigation performed in an on going Cross Divisional Project within the 4M network of Excellence, aiming at force analysis and process characterization in micro milling. Reliable force measurement in micro milling is shown to be a challenging task. Measured forces are affected by contributions coming from the machining system. Based on the performed measurements, tool engagement has been demonstrated to occur at each tooth passing, even at feeds per tooth as low as 2 μm.",

keywords = "Cutting Force measurem ent, Micro Tools, Micro Milling",

author = "Giuliano Bissacco and T. Gietzelt and Hansen, \{Hans N{\o}rgaard\}",

year = "2008",

language = "English",

pages = "241--244",

booktitle = "Proceedings of the 4th International Conference on Multi Material Micro Manufacture (4M)",

note = "4th International Conference on Multi-Material Micro Manufacture, 4M2008 ; Conference date: 09-09-2008 Through 11-09-2008",

url = "http://www.4m-net.org/Conference/4M2008",

}

TY - GEN

T1 - Force analysis in micro milling Al 6082 T6 in various engagement conditions

AU - Bissacco, Giuliano

AU - Gietzelt, T.

AU - Hansen, Hans Nørgaard

N1 - Conference code: 4

PY - 2008

Y1 - 2008

N2 - This paper discusses the issues related to force measurement in micro milling and presents the results of the experimental investigation performed in an on going Cross Divisional Project within the 4M network of Excellence, aiming at force analysis and process characterization in micro milling. Reliable force measurement in micro milling is shown to be a challenging task. Measured forces are affected by contributions coming from the machining system. Based on the performed measurements, tool engagement has been demonstrated to occur at each tooth passing, even at feeds per tooth as low as 2 μm.

AB - This paper discusses the issues related to force measurement in micro milling and presents the results of the experimental investigation performed in an on going Cross Divisional Project within the 4M network of Excellence, aiming at force analysis and process characterization in micro milling. Reliable force measurement in micro milling is shown to be a challenging task. Measured forces are affected by contributions coming from the machining system. Based on the performed measurements, tool engagement has been demonstrated to occur at each tooth passing, even at feeds per tooth as low as 2 μm.

KW - Cutting Force measurem ent

KW - Micro Tools

KW - Micro Milling

M3 - Article in proceedings

SP - 241

EP - 244

BT - Proceedings of the 4th International Conference on Multi Material Micro Manufacture (4M)

T2 - 4th International Conference on Multi-Material Micro Manufacture

Y2 - 9 September 2008 through 11 September 2008

ER -

Force analysis in micro milling Al 6082 T6 in various engagement conditions

Abstract

Conference

Keywords

OpenUrl availability

Fingerprint

Cite this