Fabrication of micro-structured surfaces by additive manufacturing, with simulation of dynamic contact angle

Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

Documents

DOI

View graph of relations

This work presents an Additive Manufacturing (AM) based method for production of components with micro-structured surfaces. Vat photopolymerization was used for the experiments by an AM custom-build machine at the Technical University of Denmark (DTU). Components with micro holes were printed in different sizes and the uniformity of them analyzed. Subsequently, in order to assess the functionality of the surface, the water droplet contact angle was measured to evaluate the wettability of the different components with micro holes. It was found that it was possible to fabricate the components with micro holes using precision AM process. The printed substrate exhibited hydrophobicity as a hydrophilic material (intrinsic contact angle of 65°). A hydrophobic surface was achieved with the printed features exhibiting a maximum contact angle of 113°. Additionally, the volume of fluid (VOF) method was employed to predict the surface contact angle. The predicted results were validated by comparison against the experiments. The average value from experiments was predicted by the model. However, it was noted that the cross-sectional height profile of the structures and the surface roughness of the printed samples, were not precisely replicated as designed, which slightly affects the prediction results, though, similar prediction trend was observed.
Original languageEnglish
Article number107839
JournalMaterials & Design
Volume176
Number of pages11
ISSN0264-1275
DOIs
Publication statusPublished - 2019
CitationsWeb of Science® Times Cited: No match on DOI

    Research areas

  • Additive manufacturing, Microstructure surfaces, Precision manufacturing, Functional surfaces, Volume of fluid

Download statistics

No data available

ID: 177811720