Fabrication of microstructured binary polymer brush "corrals" with integral pH sensing for studies of proton transport in model membrane systems

Research output: Contribution to journalJournal article – Annual report year: 2018Researchpeer-review

Without internal affiliation

DOI

  • Author: Madsen, J.

    University of Sheffield

  • Author: Ducker, R. E.

    University of Sheffield, United Kingdom

  • Author: Al Jaf, Omed

    University of Sheffield, United Kingdom

  • Author: Cartron, Michael L.

    University of Sheffield, United Kingdom

  • Author: Alswieleh, A. M.

    University of Sheffield, United Kingdom

  • Author: Smith, C. H.

    University of Sheffield, United Kingdom

  • Author: Hunter, C. N.

    University of Sheffield, United Kingdom

  • Author: Armes, Steven P.

    University of Sheffield, United Kingdom

  • Author: Leggett, Graham J.

    University of Sheffield, United Kingdom

View graph of relations

Binary brush structures consisting of poly(cysteine methacrylate) (PCysMA) "corrals" enclosed within poly(oligoethylene glycol methyl ether methacrylate) (POEGMA) "walls" are fabricated simply and efficiently using a two-step photochemical process. First, the C-Cl bonds of 4-(chloromethyl)phenylsilane monolayers are selectively converted into carboxylic acid groups by patterned exposure to UV light through a mask and POEGMA is grown from unmodified chlorinated regions by surface-initiated atom-transfer radical polymerisation (ATRP). Incorporation of a ratiometric fluorescent pH indicator, Nile Blue 2-(methacryloyloxy)ethyl carbamate (NBC), into the polymer brushes facilitates assessment of local changes in pH using a confocal laser scanning microscope with spectral resolution capability. Moreover, the dye label acts as a radical spin trap, enabling removal of halogen end-groups from the brushes via in situ dye addition during the polymerisation process. Second, an initiator is attached to the carboxylic acid-functionalised regions formed by UV photolysis in the patterning step, enabling growth of PCysMA brushes by ATRP. Transfer of the system to THF, a poor solvent for PCysMA, causes collapse of the PCysMA brushes. At the interface between the collapsed brush and solvent, selective derivatisation of amine groups is achieved by reaction with excess glutaraldehyde, facilitating attachment of aminobutyl(nitrile triacetic acid) (NTA). The PCysMA brush collapse is reversed on transfer to water, leaving it fully expanded but only functionalized at the brush-water interface. Following complexation of NTA with Ni2+, attachment of histidine-tagged proteorhodopsin and lipid deposition, light-activated transport of protons into the brush structure is demonstrated by measuring the ratiometric response of NBC in the POEGMA walls.
Original languageEnglish
JournalChemical Science
Pages (from-to)2238-2251
ISSN2041-6520
DOIs
Publication statusPublished - 2018
Externally publishedYes

Bibliographical note

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence

CitationsWeb of Science® Times Cited: No match on DOI

ID: 143526190