Fabricating eco-friendly nanocomposites of SiC with morphologically-different nano-carbonaceous phases 

Research output: Contribution to journalJournal article – Annual report year: 2018Researchpeer-review

View graph of relations

A route based on aqueous colloidal processing followed by liquid-phase assisted spark-plasma-sintering (SPS) is described for fabricating eco-friendly nanocomposites of SiC with nano-carbonaceous phases (nanotubes, nanoplatelets, or nanoparticles). To this end, the conditions optimizing the aqueous colloidal co-dispersion of SiC nanoparticles, Y3Al5O12 nanoparticles (acting as sintering additives), and carbon nanotubes (CNTs), graphene oxide (GO) nanoplatelets, or carbon black (CB) nanoparticles were first identified. Next, homogeneous powder mixtures were prepared by freeze-drying, and densified by liquid-phase assisted SPS, thus obtaining nanocomposites of SiC with CNTs, reduced GO (rGO) nanoplatelets, or pyrolized + graphitized CB (p + gCB) nanoparticles. It is also shown that these nanocomposites are dense and have a high hardness of ∼20 GPa regardless of the nano-carbonaceous phase chosen, but are markedly tougher with CNTs and rGO (i.e., with high aspect ratio nano-carbonaceous phases). Finally, arguments are provided for the appropriate choice of nano-carbonaceous phases for engineering ceramic nanocomposites.
Original languageEnglish
JournalJournal of the European Ceramic Society
Volume38
Issue number11
Pages (from-to)3735-3741
ISSN0955-2219
DOIs
Publication statusPublished - 2018
CitationsWeb of Science® Times Cited: No match on DOI

    Research areas

  • SiC, Aqueous colloidal processing, Spark-plasma sintering, Ceramic nanocomposites, Nano-carbonaceous reinforcements

ID: 147057901