Extrusion and properties of lead zirconate titanate piezoelectric ceramics

S. Cai, C.E. Millar, L. Pedersen, O. Toft Sørensen, Y. Xu

    Research output: Contribution to journalConference articleResearch

    Abstract

    The purpose of this work was to develop a procedure for fabricating electroceramic actuators with good piezoelectric properties. The preparation of lead zirconate titanate (PZT) piezoelectric ceramic rods and tubes by extrusion processing is described. The microstructure of extrudates was investigated in comparision with different processing conditions. Finally, the measuremental results of density, dielectric and piezoelectric properties are reported and analyzed.
    Original languageEnglish
    JournalFerroelectrics
    Volume196
    Issue number1
    Pages (from-to)69-72
    ISSN0015-0193
    DOIs
    Publication statusPublished - 1997
    Event1st Asian Meeting on Ferroelectrics: 2nd East Asia Conference on Chemical Sensors / International Conference on Electronic Components and Materials / International Conference on Sensors and Actuators - Xian, China
    Duration: 4 Oct 19957 Oct 1995
    Conference number: 1/2

    Conference

    Conference1st Asian Meeting on Ferroelectrics
    Number1/2
    Country/TerritoryChina
    CityXian
    Period04/10/199507/10/1995

    Fingerprint

    Dive into the research topics of 'Extrusion and properties of lead zirconate titanate piezoelectric ceramics'. Together they form a unique fingerprint.

    Cite this