Extensive 3D mapping of dislocation structures in bulk aluminum

Can Yildirim*, Henning F. Poulsen, Grethe Winther, Carsten Detlefs, Pin H. Huang, Leora E. Dresselhaus-Marais

*Corresponding author for this work

Research output: Contribution to journalJournal articleResearchpeer-review

70 Downloads (Pure)

Abstract

Thermomechanical processing such as annealing is one of the main methods to tailor the mechanical properties of materials, however, much is unknown about the reorganization of dislocation structures deep inside macroscopic crystals that give rise to those changes. Here, we demonstrate the self-organization of dislocation structures upon high-temperature annealing in a mm-sized single crystal of aluminum.

We map a large embedded 3D volume ([Formula: see text] [Formula: see text]m[Formula: see text]) of dislocation structures using dark field X-ray microscopy (DFXM), a diffraction-based imaging technique. Over the wide field of view, DFXM's high angular resolution allows us to identify subgrains, separated by dislocation boundaries, which we identify and characterize down to the single-dislocation level using computer-vision methods.

We demonstrate how even after long annealing times at high temperatures, the remaining low density of dislocations still pack into well-defined, straight dislocation boundaries (DBs) that lie on specific crystallographic planes. In contrast to conventional grain growth models, our results show that the dihedral angles at the triple junctions are not the predicted 120[Formula: see text], suggesting additional complexities in the boundary stabilization mechanisms.

Mapping the local misorientation and lattice strain around these boundaries shows that the observed strain is shear, imparting an average misorientation around the DB of [Formula: see text] 0.003 to 0.006[Formula: see text].
Original languageEnglish
Article number3834
JournalScientific Reports
Volume13
Issue number1
Number of pages11
ISSN2045-2322
DOIs
Publication statusPublished - 2023

Fingerprint

Dive into the research topics of 'Extensive 3D mapping of dislocation structures in bulk aluminum'. Together they form a unique fingerprint.

Cite this