Experimental investigation in turning as a basis for modelling chip formation, tool life and cutting fluid performance

Dragos A. Axinte

    Research output: Book/ReportReportResearch

    Abstract

    Tool life is a parameter closely connected to the lubricating effect of a cutting fluid. Long tool life in turning corresponds to good lubrication and a process with good lubrication is preferred, since it normally results in lower tool wear and better surface quality. Cutting forces are mainly important for understanding the mechanism of the cutting process itself and to perform in this way data about the influence of the cutting fluids.
    Original languageEnglish
    PublisherTechnical University of Denmark
    Number of pages27
    Publication statusPublished - 2000

    Keywords

    • MM00.11

    Fingerprint Dive into the research topics of 'Experimental investigation in turning as a basis for modelling chip formation, tool life and cutting fluid performance'. Together they form a unique fingerprint.

    Cite this