Experience with Calibration Procedures for LIPP Test Set-up Using Solid Calibration Specimens

Mogens Henriksen, Joachim Holbøll, R.J. Fleming

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

196 Downloads (Pure)

Abstract

This paper describes the short and the long term behaviour of two different materials that have been suggested for calibration of space charge measuring systems. Two different space charge measuring systems were planned to be used for the investigation; more specifically, the laser induced pressure pulse (LIPP) system and the pulsed electroacoustic (PEA) system. The material used for the calibration test was 100 μm thick corona charged PET (Mylar) film. It was concluded that such film is unlikely to be useful for calibration purposes
Original languageEnglish
Title of host publicationElectrical Insulation, 1998. Conference Record of the 1998 IEEE International Symposium on
Volume2
PublisherIEEE
Publication date1998
Pages494-498
ISBN (Print)0-7803-4927-X
DOIs
Publication statusPublished - 1998
Event1998 IEEE International Symposium on Electrical Insulation - Washington, United States
Duration: 7 Jun 199810 Jun 1998
http://ieeexplore.ieee.org/xpl/mostRecentIssue.jsp?punumber=5629

Conference

Conference1998 IEEE International Symposium on Electrical Insulation
CountryUnited States
CityWashington
Period07/06/199810/06/1998
Internet address

Bibliographical note

Copyright: 1998 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE

Cite this

Henriksen, M., Holbøll, J., & Fleming, R. J. (1998). Experience with Calibration Procedures for LIPP Test Set-up Using Solid Calibration Specimens. In Electrical Insulation, 1998. Conference Record of the 1998 IEEE International Symposium on (Vol. 2, pp. 494-498). IEEE. https://doi.org/10.1109/ELINSL.1998.694841