Exercise in Configurable Products using Creo parametric

Georg Kronborg Christensen

Research output: Book/ReportCompendium/lecture notesEducation

777 Downloads (Pure)

Abstract

Family tables is a long know method with ProEngineer/Creo parametric to make families of products – like families of bolts and roller bearings. Configurable Products expand these possibilities in two major ways: First it makes configurable assemblies possible where one topologically different component can replace another. Secondly it presents the configurable product in an interactive way which enable the user to experiment with product configurations and different variants in an easy way. In this exercise we will replace a circular axel with a hexagonal axel. (some of this functionality has been available as: configurable assemblies in earlier versions of Creo) An example of a practical application of configurable products is shown below where an outdoor Play/Exercise system is transferred from AutoCAD 2D to a 3D configurable product in Creo 3.0.
Original languageEnglish
Number of pages9
Publication statusPublished - 2017
EventPTC-User Konference 2017 - Trinity Hotel & Konference Centre, Fredericia, Denmark
Duration: 7 Mar 20178 Mar 2017

Conference

ConferencePTC-User Konference 2017
LocationTrinity Hotel & Konference Centre
CountryDenmark
CityFredericia
Period07/03/201708/03/2017

Cite this