Abstract
Ion cyclotron resonance heating is a versatile heating method that has been demonstrated to be able to efficiently couple power directly to the ions via the fast magnetosonic wave. However, at temperatures relevant for reactor grade devices such as DEMO, electron damping becomes increasingly important. To reduce electron damping, it is possible to use an antenna with a power spectrum dominated by low parallel wavenumbers. Moreover, using an antenna with a unidirectional spectrum, such as a travelling wave array antenna, the parallel wavenumber can be downshifted by mounting the antenna in an elevated position relative to the equatorial plane. This downshift can potentially enhance ion heating as well as fast wave current drive efficiency. Thus, such a system could benefit ion heating during the ramp-up phase and be used for current drive during flat-top operation. To test this principle, both ion heating and current drive have been simulated in a DEMO-like plasma for a few different mounting positions of the antenna using the FEMIC code. We find that moving the antenna off the equatorial plane makes ion heating more efficient for all considered plasma temperatures at the expense of on-axis heating. Moreover, although current drive efficiency is enhanced, electron damping is reduced for lower mode numbers, thus reducing the driven current in this part of the spectrum.
Original language | English |
---|---|
Article number | E13 |
Journal | Journal of Plasma Physics |
Volume | 91 |
Issue number | 1 |
Number of pages | 14 |
ISSN | 0022-3778 |
DOIs | |
Publication status | Published - 2025 |
Keywords
- Fusion plasma
- Plasma heating
- Plasma simulation