Electrochemical removal of NOx using oxide-based electrodes - A review

Research output: Contribution to journalReview – Annual report year: 2018Researchpeer-review

Documents

DOI

View graph of relations

Solid-state electrochemical reduction of NOx using oxide-based electrodes is reviewed. Different types of electrode and cell geometries have been used in the literature. Using simple ceramic point electrodes prepared using different materials; it has been shown that nitric oxide is reduced at different rates on different materials. For perovskites, it has been shown that the amount of trivalent transition metal and amount of oxide ion vacancies are important for the reduction of nitric oxide. The same applies to Cu and Ni-based K2NiF4 structures. For spinels, the pattern is less clear, but they are all able to reduce nitric oxide. Current densities are much higher when reducing nitrogen dioxide compared with nitric oxide on both perovskites and spinels. In gas mixtures containing nitric oxide and oxygen, the addition of BaO leads to fairly high conversion of nitric oxide into nitrogen. Finally, it has been shown that oxidizing nitric oxide to nitrogen dioxide before reducing to nitrogen is very beneficial, leading to current efficiencies of up to 65%.
Original languageEnglish
JournalInternational Journal of Electrochemical Science
Volume13
Issue number10
Pages (from-to)9273-9280
ISSN1452-3981
DOIs
Publication statusPublished - 2018
CitationsWeb of Science® Times Cited: No match on DOI

    Research areas

  • Electrochemical deNOx, NO, NO2, Oxides

Download statistics

No data available

ID: 160560741