Abstract
High sulfate (SO42-) concentration inhibits seawater utilization but provides a potential source for elemental sulfur (S0) production. The aim of this study was to investigate the feasibility of SO42- removal with the enhancement of S0 recovery simultaneously using a biotic-abiotic hybrid electrochemical (BAHE) process. Long-term operation (i.e., ∼ 240 d) of the biotic electrochemical unit (i.e., single-chamber bioelectrochemical system) obtained a low S0 recovery of 0.78 ± 0.08 % with high SO42- removal exceeding 95 %. The non-conductive S0 precipitated on the anodic surface inhibited continuous electrochemical oxidation of S2-, resulting in the S2- accumulation in the effluent of the bioelectrochemical process and low S0 recovery. In contrast, efficient S2- oxidation took place on the anode surface of the abiotic electrochemical process with electricity generation. The final S2- concentration in the BAHE process was much lower than that in the individual bioelectrochemical process (3 ± 1 vs. 539 ± 60 mg/L). Efficient S0 recovery (i.e., 71.73 ± 7.17 %) and SO42- reduction (92 ± 5 %) were realized in the BAHE process, mainly attributed to the synergistic effect between the single-chamber bioelectrochemical and abiotic electrochemical cells. Our results may provide a promising way for both seawater utilization and elemental sulfur production.
Original language | English |
---|---|
Article number | 128804 |
Journal | Separation and Purification Technology |
Volume | 354 |
Number of pages | 12 |
ISSN | 1383-5866 |
DOIs | |
Publication status | Published - 2024 |
Keywords
- Sulfur recovery
- Sulfate removal
- Seawater
- Biotic-abiotic hybrid electrochemical process