Effects of interface roughness on the annealing behaviour of laminated Ti-Al composite deformed by hot rolling

Y. Du, G.H. Fan, Tianbo Yu, Niels Hansen, L. Geng, Xiaoxu Huang

Research output: Contribution to journalConference articleResearchpeer-review

405 Downloads (Pure)

Abstract

A laminated Ti-Al composite has been fabricated by hot compaction and hot rolling of alternate layers of commercial purity Ti and Al sheets with a thickness of 200 μm. The hot compaction temperature was 500˚C and in a following step the composite has been reduced 50% in thickness by hot rolling. The fully consolidated composite has been annealed at 300˚C and 500˚C for different length of time. As a result of the differences in crystal structure and mechanical properties between Ti and Al protrusions and retrusions formed at the interface. A heterogeneous interface has thereby been created. The heterogeneity affected the recovery kinetics of the aluminium phase which at 300˚C was faster near the interface than in the middle of the Al layer. This effect of a heterogeneous interface is of relevance when optimizing the thermomechanical processing of the composite to obtain high strength and formability for application.
Original languageEnglish
Article number012021
JournalI O P Conference Series: Materials Science and Engineering
Volume89
Number of pages7
ISSN1757-8981
DOIs
Publication statusPublished - 2015
Event36th Risø International Symposium on Materials Science - DTU Risø Campus, Roskilde, Denmark
Duration: 7 Sep 201511 Sep 2015
Conference number: 36

Conference

Conference36th Risø International Symposium on Materials Science
Number36
LocationDTU Risø Campus
CountryDenmark
CityRoskilde
Period07/09/201511/09/2015

Bibliographical note

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. Published under licence by IOP Publishing Ltd

Fingerprint Dive into the research topics of 'Effects of interface roughness on the annealing behaviour of laminated Ti-Al composite deformed by hot rolling'. Together they form a unique fingerprint.

Cite this