Dosimetry measurements during the commissioning of the GJ-2 electron accelerator

R. Chosdu; N. Hilmy; R. Tobing; L.T.K. Kicky; M. Razzak; A. Kovacs; A. Miller

doi:10.1016/0969-806X(95)00350-7

Dosimetry measurements during the commissioning of the GJ-2 electron accelerator

R. Chosdu
, N. Hilmy
, R. Tobing
, L.T.K. Kicky
, M. Razzak
, A. Kovacs
, A. Miller

Research output: Contribution to journal › Conference article › Research › peer-review

Abstract

The GJ-2 electron accelerator (made in China, Sanghai) was put into operation at the Centre for Application of Isotopes and Radiation in Jakarta, Indonesia.

In the course of the commissioning of the machine its main technical parameters were measured under different operating conditions. The electron energy was determined applying both wedge and stack methods at 1.5 and 2.0 MeV. The scanning width and homogeneity and the dose distribution in reference product were measured with film dosimeters. Nominal dose measurements were performed using alanine-polyethylene dosimeters produced at CAIR, ethanol-chlorobenzene dosimeter solution and FWT-60 film dosimeters. The applicability of polystyrene calorimeters designed for low electron energies at Ris phi National Laboratory was also tested for nominal dose determination.

Original language	English
Journal	Radiation Physics and Chemistry
Volume	46
Issue number	4-6
Pages (from-to)	1175-1179
ISSN	0969-806X
DOIs	https://doi.org/10.1016/0969-806X(95)00350-7
Publication status	Published - 1995
Event	9th International Meeting on Radiation Processing - Istanbul, Turkey Duration: 11 Sept 1994 → 16 Sept 1994 Conference number: 9

Conference

Conference	9th International Meeting on Radiation Processing
Number	9
Country/Territory	Turkey
City	Istanbul
Period	11/09/1994 → 16/09/1994

Access to Document

10.1016/0969-806X(95)00350-7

OpenUrl availability

Check availability in DTU Findit

Cite this

@inproceedings{2def9a55a30b42ab9ccaa001f51e16e2,

title = "Dosimetry measurements during the commissioning of the GJ-2 electron accelerator",

abstract = "The GJ-2 electron accelerator (made in China, Sanghai) was put into operation at the Centre for Application of Isotopes and Radiation in Jakarta, Indonesia. In the course of the commissioning of the machine its main technical parameters were measured under different operating conditions. The electron energy was determined applying both wedge and stack methods at 1.5 and 2.0 MeV. The scanning width and homogeneity and the dose distribution in reference product were measured with film dosimeters. Nominal dose measurements were performed using alanine-polyethylene dosimeters produced at CAIR, ethanol-chlorobenzene dosimeter solution and FWT-60 film dosimeters. The applicability of polystyrene calorimeters designed for low electron energies at Ris phi National Laboratory was also tested for nominal dose determination. ",

keywords = "Atmosf{\ae}riske processers betydning for milj{\o}et",

author = "R. Chosdu and N. Hilmy and R. Tobing and L.T.K. Kicky and M. Razzak and A. Kovacs and A. Miller",

year = "1995",

doi = "10.1016/0969-806X(95)00350-7",

language = "English",

volume = "46",

pages = "1175--1179",

journal = "Radiation Physics and Chemistry",

issn = "0969-806X",

publisher = "Elsevier",

number = "4-6",

note = "9th International Meeting on Radiation Processing ; Conference date: 11-09-1994 Through 16-09-1994",

}

TY - GEN

T1 - Dosimetry measurements during the commissioning of the GJ-2 electron accelerator

AU - Chosdu, R.

AU - Hilmy, N.

AU - Tobing, R.

AU - Kicky, L.T.K.

AU - Razzak, M.

AU - Kovacs, A.

AU - Miller, A.

N1 - Conference code: 9

PY - 1995

Y1 - 1995

N2 - The GJ-2 electron accelerator (made in China, Sanghai) was put into operation at the Centre for Application of Isotopes and Radiation in Jakarta, Indonesia. In the course of the commissioning of the machine its main technical parameters were measured under different operating conditions. The electron energy was determined applying both wedge and stack methods at 1.5 and 2.0 MeV. The scanning width and homogeneity and the dose distribution in reference product were measured with film dosimeters. Nominal dose measurements were performed using alanine-polyethylene dosimeters produced at CAIR, ethanol-chlorobenzene dosimeter solution and FWT-60 film dosimeters. The applicability of polystyrene calorimeters designed for low electron energies at Ris phi National Laboratory was also tested for nominal dose determination.

AB - The GJ-2 electron accelerator (made in China, Sanghai) was put into operation at the Centre for Application of Isotopes and Radiation in Jakarta, Indonesia. In the course of the commissioning of the machine its main technical parameters were measured under different operating conditions. The electron energy was determined applying both wedge and stack methods at 1.5 and 2.0 MeV. The scanning width and homogeneity and the dose distribution in reference product were measured with film dosimeters. Nominal dose measurements were performed using alanine-polyethylene dosimeters produced at CAIR, ethanol-chlorobenzene dosimeter solution and FWT-60 film dosimeters. The applicability of polystyrene calorimeters designed for low electron energies at Ris phi National Laboratory was also tested for nominal dose determination.

KW - Atmosfæriske processers betydning for miljøet

U2 - 10.1016/0969-806X(95)00350-7

DO - 10.1016/0969-806X(95)00350-7

M3 - Conference article

SN - 0969-806X

VL - 46

SP - 1175

EP - 1179

JO - Radiation Physics and Chemistry

JF - Radiation Physics and Chemistry

IS - 4-6

T2 - 9th International Meeting on Radiation Processing

Y2 - 11 September 1994 through 16 September 1994

ER -

Dosimetry measurements during the commissioning of the GJ-2 electron accelerator

Abstract

Conference

Access to Document

OpenUrl availability

Fingerprint

Cite this