Direct Fabrication of Microstructured Surfaces by Additive Manufacturing

Research output: Chapter in Book/Report/Conference proceedingConference abstract in proceedings – Annual report year: 2019Researchpeer-review

Documents

View graph of relations

Different fabrication methods can be applied for micro fabrication, all characterized by their specific processing time and cost. However, by using the additive manufacturing (AM) technologies for direct micro manufacturing of complex micro geometries the average production time and cost can be drastically reduced. This study investigates an AM-based fabrication method for the production of microstructure surfaces with different feature sizes (50-150 μm). The experiments presented in this work have been carried out in a specifically designed vat photopolymerization AM machine suitable for precision printing developed, built and validated at the Technical University of Denmark (DTU). The AM method was evaluated in terms the capability of the system to produce micro pillars and holes array in different sizes and with increasing geometrical complexity.
Original languageEnglish
Title of host publicationProceedings of the 19th International Conference and Exhibition (EUSPEN 2019)
EditorsC. Nisbet, R. K. Leach , D. Billington, D. Phillips
PublisherThe European Society for Precision Engineering and Nanotechnology
Publication date2019
Pages118-119
ISBN (Electronic)978-099577514-5
Publication statusPublished - 2019
Eventeuspen's 19th International Conference & Exhibition - Bilbao, Spain
Duration: 3 Jun 20197 Jun 2019

Conference

Conferenceeuspen's 19th International Conference & Exhibition
CountrySpain
CityBilbao
Period03/06/201907/06/2019

    Research areas

  • Additive Manufacturing, Vat Photopolymerization, Micro Manufacturing, Photopolymer

ID: 192241506