Developments in Fluid Power Control of Machinery and
                Manipulators (1 of 2): Simulation in Fluid Power as a Tool for a Virtual Prototyping
                in a Concurrent Engineering Environment

Finn Conrad; Luca G. Zarotti; Torben Sørensen; Mads Grahl-Madsen

Developments in Fluid Power Control of Machinery and Manipulators (1 of 2): Simulation in Fluid Power as a Tool for a Virtual Prototyping in a Concurrent Engineering Environment

Finn Conrad, Luca G. Zarotti, Torben Sørensen, Mads Grahl-Madsen

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

Abstract

The paper presents objectives and results from the ESPRIT project SWING.The increasing competition on the world marked and the increasing public demands, requirements and regulations for protection of the environment are both driving forces and challenges for improving the development of control and engineering design.The main aim of the SWING project is to improve the engineering design and product development cycle in SME's in the mechanical industry, and particulary in the hydraulic sector, through the introduction of best-practice using simulation and modelling IT-tools.

Original language	English
Title of host publication	Developments in Fluid Power Control of Machinery and MAnipulators
Place of Publication	Cracow
Publisher	Fluid Power Net Publication
Publication date	2000
Pages	62-66
Publication status	Published - 2000
Event	2nd International Scientific Forum - Cracow, Poland Duration: 28 Jun 2000 → 2 Jul 2000 Conference number: 2

Conference

Conference	2nd International Scientific Forum
Number	2
Country	Poland
City	Cracow
Period	28/06/2000 → 02/07/2000

Cite this

Conrad, F., Zarotti, L. G., Sørensen, T., & Grahl-Madsen, M. (2000). Developments in Fluid Power Control of Machinery and Manipulators (1 of 2): Simulation in Fluid Power as a Tool for a Virtual Prototyping in a Concurrent Engineering Environment. In Developments in Fluid Power Control of Machinery and MAnipulators (pp. 62-66). Fluid Power Net Publication.

Conrad, Finn ; Zarotti, Luca G. ; Sørensen, Torben ; Grahl-Madsen, Mads. / Developments in Fluid Power Control of Machinery and Manipulators (1 of 2) : Simulation in Fluid Power as a Tool for a Virtual Prototyping in a Concurrent Engineering Environment. Developments in Fluid Power Control of Machinery and MAnipulators. Cracow : Fluid Power Net Publication, 2000. pp. 62-66

@inproceedings{615ce0a2c6964a13a65367858de0abfc,

title = "Developments in Fluid Power Control of Machinery and Manipulators (1 of 2): Simulation in Fluid Power as a Tool for a Virtual Prototyping in a Concurrent Engineering Environment",

abstract = "The paper presents objectives and results from the ESPRIT project SWING.The increasing competition on the world marked and the increasing public demands, requirements and regulations for protection of the environment are both driving forces and challenges for improving the development of control and engineering design.The main aim of the SWING project is to improve the engineering design and product development cycle in SME's in the mechanical industry, and particulary in the hydraulic sector, through the introduction of best-practice using simulation and modelling IT-tools.",

author = "Finn Conrad and Zarotti, {Luca G.} and Torben S{\o}rensen and Mads Grahl-Madsen",

year = "2000",

language = "English",

pages = "62--66",

booktitle = "Developments in Fluid Power Control of Machinery and MAnipulators",

publisher = "Fluid Power Net Publication",

note = "2nd International Scientific Forum ; Conference date: 28-06-2000 Through 02-07-2000",

}

Conrad, F, Zarotti, LG, Sørensen, T & Grahl-Madsen, M 2000, Developments in Fluid Power Control of Machinery and Manipulators (1 of 2): Simulation in Fluid Power as a Tool for a Virtual Prototyping in a Concurrent Engineering Environment. in Developments in Fluid Power Control of Machinery and MAnipulators. Fluid Power Net Publication, Cracow, pp. 62-66, 2nd International Scientific Forum, Cracow, Poland, 28/06/2000.

Developments in Fluid Power Control of Machinery and Manipulators (1 of 2) : Simulation in Fluid Power as a Tool for a Virtual Prototyping in a Concurrent Engineering Environment. / Conrad, Finn; Zarotti, Luca G.; Sørensen, Torben; Grahl-Madsen, Mads.

Developments in Fluid Power Control of Machinery and MAnipulators. Cracow : Fluid Power Net Publication, 2000. p. 62-66.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

TY - GEN

T1 - Developments in Fluid Power Control of Machinery and Manipulators (1 of 2)

T2 - 2nd International Scientific Forum

AU - Conrad, Finn

AU - Zarotti, Luca G.

AU - Sørensen, Torben

AU - Grahl-Madsen, Mads

N1 - Conference code: 2

PY - 2000

Y1 - 2000

N2 - The paper presents objectives and results from the ESPRIT project SWING.The increasing competition on the world marked and the increasing public demands, requirements and regulations for protection of the environment are both driving forces and challenges for improving the development of control and engineering design.The main aim of the SWING project is to improve the engineering design and product development cycle in SME's in the mechanical industry, and particulary in the hydraulic sector, through the introduction of best-practice using simulation and modelling IT-tools.

AB - The paper presents objectives and results from the ESPRIT project SWING.The increasing competition on the world marked and the increasing public demands, requirements and regulations for protection of the environment are both driving forces and challenges for improving the development of control and engineering design.The main aim of the SWING project is to improve the engineering design and product development cycle in SME's in the mechanical industry, and particulary in the hydraulic sector, through the introduction of best-practice using simulation and modelling IT-tools.

M3 - Article in proceedings

SP - 62

EP - 66

BT - Developments in Fluid Power Control of Machinery and MAnipulators

PB - Fluid Power Net Publication

CY - Cracow

Y2 - 28 June 2000 through 2 July 2000

ER -

Conrad F, Zarotti LG, Sørensen T, Grahl-Madsen M. Developments in Fluid Power Control of Machinery and Manipulators (1 of 2): Simulation in Fluid Power as a Tool for a Virtual Prototyping in a Concurrent Engineering Environment. In Developments in Fluid Power Control of Machinery and MAnipulators. Cracow: Fluid Power Net Publication. 2000. p. 62-66