Abstract
This project has five specific objectives: To provide traceability for dynamic pressure and temperature through development of measurement standards and validated calibration procedures; To quantify the effects of influencing quantities on the response of dynamic pressure and temperature sensors, in order to determine the appropriate calibration procedures and measurement uncertainties for industrial measurements; To develop new measurement methods and sensors for measuring dynamic pressure and temperature in demanding industrial applications, and to demonstrate the improved accuracy and reliability obtained with those; To validate all of the methods and sensors developed in this project through demonstrations in selected industrial applications; and To ensure by close engagement with industry, that the developed calibration and measurement techniques and technology are adopted by them. The challenge is that in many industrial applications pressure and temperature measurements are performed under dynamically changing conditions. The aim of this project is to improve the accuracy and reliability of pressure and temperature measurements in these challenging conditions. A European joint research project named Development of measurement and calibration techniques for dynamic pressures and temperatures (shortname DynPT) started in the summer 2018.
Original language | English |
---|---|
Article number | 162015 |
Book series | Journal of Physics: Conference Series (Online) |
Volume | 1065 |
Issue number | 16 |
Number of pages | 4 |
ISSN | 1742-6596 |
DOIs | |
Publication status | Published - 2018 |
Event | XXII World Congress of the International Measurement Confederation - Belfast, United Kingdom Duration: 3 Sep 2018 → 6 Sep 2018 Conference number: 22 http://www.imeko2018.org/ |
Conference
Conference | XXII World Congress of the International Measurement Confederation |
---|---|
Number | 22 |
Country | United Kingdom |
City | Belfast |
Period | 03/09/2018 → 06/09/2018 |
Internet address |