Detailed modelling of biomass steam gasification in a dual fluidized bed gasifier with temperature variation

Research output: Contribution to journalJournal article – Annual report year: 2019Researchpeer-review

View graph of relations

The modelling of biomass gasification enables the optimization of the process designs, but it is a challenge due to its high complexity. Here a model for prediction of the performance of a 100-kW dual bed fluidized biomass gasifier is derived and implemented in the ASPEN plus environment. Detailed pyrolysis modelling is properly addressed, and this is believed to be a key factor of this approach and enables more accurate results. The proposed model and its basic assumptions were extensively validated on a range of operating temperature by conducting experiments using softwood pellets as fuel and fresh olivine sand as bed material. The impact of the gasifier temperature variation on the final product gas composition is measured in the experiments and used to tune the model to have a better insight on the pyrolysis process, the char heterogeneous reactions as well as the deviation from equilibrium of the water gas-shift reaction. After the assessment phase, the model was applied to to the simulation of a real case experiments and measured gas yields. The results can be considered appropriate and the difference between prediction and measurement of H2, CO and CO2 are lower than 10%, while CH4/C2H4 show values that are slightly higher than 10%.

Original languageEnglish
JournalRenewable Energy
Volume143
Pages (from-to)703-718
ISSN0960-1481
DOIs
Publication statusPublished - 2019
CitationsWeb of Science® Times Cited: No match on DOI

    Research areas

  • Biomass gasification, Dual fluidized bed, Power generation, Renewable energy, Thermo-chemical conversion

ID: 183759079