Design and optimization of air bottoming cycles for waste heat recovery in off-shore platforms

Leonardo Pierobon, Fredrik Haglind

Research output: Contribution to journalJournal articleResearchpeer-review

1054 Downloads (Pure)

Abstract

This paper aims at comparing two methodologies to design an air bottoming cycle recovering the waste heat from the power generation system on the Draugen off-shore oil and gas platform. Firstly, the design is determined using the theory of the power maximization. Subsequently, the multi-objective optimization approach is employed to maximize the economic revenue, the compactness and the power production of the air bottoming cycle. The system compactness is assessed by introducing a detailed model of the shell and tube recuperator and including geometric quantities in the set of optimization variables. Findings indicate that using the power production, the volume of the recuperator and the net present value as objective functions the optimal pressure ratio (2.52) and the exhaust gas temperature (178.8 °C) differ from the values (2.80 and 145.5 °C) calculated using the theory of the power maximization. The highest net present value (2.8 M$) is found for a volume of the recuperator of 128 m3. Thus, it can be concluded that the multi-objective optimization approach enables extending the theory of power maximization bridging the gap between a mere optimization of the thermodynamic cycle and the practical feasibility of a power generation system.
Original languageEnglish
JournalApplied Energy
Volume118
Pages (from-to)156–165
ISSN0306-2619
DOIs
Publication statusPublished - 2014

Keywords

  • Air bottoming cycle
  • Power Maximization
  • Gas Turbine
  • Shell and Tube Heat Exchanger
  • Off-shore platform

Cite this