Design and manufacturing of a morphing flap for wind turbine blades

Peter Bjørn Andersen, Helge Aagaard Madsen , Tom Løgstrup Andersen, Thomas Schettler

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

316 Downloads (Pure)

Abstract

This document describes the current status of the flap prototype development in the INDUFLAP project funded by the EUDP programme from the Danish Ministry of Energy.
Original languageEnglish
Title of host publicationProceedings of 6th ECCOMAS Conference on Smart Structures and Materials (SMART 2013)
Number of pages8
PublisherPolitecnico di Torino
Publication date2013
Publication statusPublished - 2013
EventECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2013) - Politecnico di Torino, Torino, Italy
Duration: 24 Jun 201326 Jun 2013

Conference

ConferenceECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2013)
LocationPolitecnico di Torino
CountryItaly
CityTorino
Period24/06/201326/06/2013

Cite this

Andersen, P. B., Aagaard Madsen , H., Løgstrup Andersen, T., & Schettler, T. (2013). Design and manufacturing of a morphing flap for wind turbine blades. In Proceedings of 6th ECCOMAS Conference on Smart Structures and Materials (SMART 2013) Politecnico di Torino.
Andersen, Peter Bjørn ; Aagaard Madsen , Helge ; Løgstrup Andersen, Tom ; Schettler, Thomas. / Design and manufacturing of a morphing flap for wind turbine blades. Proceedings of 6th ECCOMAS Conference on Smart Structures and Materials (SMART 2013). Politecnico di Torino, 2013.
@inproceedings{94b21a79fcdb40d19847cbf1487bd0d4,
title = "Design and manufacturing of a morphing flap for wind turbine blades",
abstract = "This document describes the current status of the flap prototype development in the INDUFLAP project funded by the EUDP programme from the Danish Ministry of Energy.",
author = "Andersen, {Peter Bj{\o}rn} and {Aagaard Madsen}, Helge and {L{\o}gstrup Andersen}, Tom and Thomas Schettler",
year = "2013",
language = "English",
booktitle = "Proceedings of 6th ECCOMAS Conference on Smart Structures and Materials (SMART 2013)",
publisher = "Politecnico di Torino",

}

Andersen, PB, Aagaard Madsen , H, Løgstrup Andersen, T & Schettler, T 2013, Design and manufacturing of a morphing flap for wind turbine blades. in Proceedings of 6th ECCOMAS Conference on Smart Structures and Materials (SMART 2013). Politecnico di Torino, ECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2013), Torino, Italy, 24/06/2013.

Design and manufacturing of a morphing flap for wind turbine blades. / Andersen, Peter Bjørn; Aagaard Madsen , Helge; Løgstrup Andersen, Tom; Schettler, Thomas.

Proceedings of 6th ECCOMAS Conference on Smart Structures and Materials (SMART 2013). Politecnico di Torino, 2013.

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

TY - GEN

T1 - Design and manufacturing of a morphing flap for wind turbine blades

AU - Andersen, Peter Bjørn

AU - Aagaard Madsen , Helge

AU - Løgstrup Andersen, Tom

AU - Schettler, Thomas

PY - 2013

Y1 - 2013

N2 - This document describes the current status of the flap prototype development in the INDUFLAP project funded by the EUDP programme from the Danish Ministry of Energy.

AB - This document describes the current status of the flap prototype development in the INDUFLAP project funded by the EUDP programme from the Danish Ministry of Energy.

M3 - Article in proceedings

BT - Proceedings of 6th ECCOMAS Conference on Smart Structures and Materials (SMART 2013)

PB - Politecnico di Torino

ER -

Andersen PB, Aagaard Madsen H, Løgstrup Andersen T, Schettler T. Design and manufacturing of a morphing flap for wind turbine blades. In Proceedings of 6th ECCOMAS Conference on Smart Structures and Materials (SMART 2013). Politecnico di Torino. 2013