Deposition of methylammonium iodide: Via evaporation-combined kinetic and mass spectrometric study

Martin J. Bækbo, Ole Hansen, Ib Chorkendorff, Peter C.K. Vesborg*

*Corresponding author for this work

Research output: Contribution to journalJournal articleResearchpeer-review

192 Downloads (Pure)

Abstract

Methylammonium lead halide perovskites have recently emerged as a very attractive and versatile material for solar cell production. Several different perovskite fabrication methods can be used though most of them involve either spin coating, evaporation under high vacuum or a combination hereof. In this study we focus on thermal evaporation of methylammonium iodide (MAI), or more specifically, why this process, in terms of a physical vapour deposition, requires such a high deposition pressure to be successful. We use quartz crystal micro balance (QCM) measurements as well as mass spectrometry. The results indicate that MAI has a very low sticking especially if the substrate is held at elevated temperatures and is furthermore observed to evaporate with disproportionation into primarily CH3NH2 and HI. Even when PbCl2 is deposited on the QCM crystal, so that CH3NH3PbI(3-x)Clx perovskite can form, the MAI sticking remains low, possibly due to the requirement that both species be present on the film surface at the same time to form the perovskite. The results provide guidelines for designing a perovskite deposition chamber and additionally fundamental information about MAI evaporation.
Original languageEnglish
JournalR S C Advances
Volume8
Issue number52
Pages (from-to)29899-29908
ISSN2046-2069
DOIs
Publication statusPublished - 2018

Cite this