Demoulding force in micro-injection moulding

C.A. Griffiths; S.S. Dimov; S. Scholz; Guido Tosello; A. Rees

Demoulding force in micro-injection moulding

C.A. Griffiths, S.S. Dimov, S. Scholz, Guido Tosello, A. Rees

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research

Abstract

The paper reports an experimental study that investigates part demoulding behavior in micro injection moulding (MIM) with a focus on the effects of pressure (P) and temperature (T) on the demoulding forces. Demoulding of a microfluidics part is conducted and the four processing parameters of melt temperature (Tb), mould temperature (Tm), holding pressure (Ph) and injection speed (Vi) are analysed. The result using different combinations of process parameters were used to identify the best processing conditions in regards to demoulding forces when moulding micro parts.

Original language	English
Title of host publication	Proceedings of the 7th International Conference on Micro Manufacturing
Publication date	2012
Pages	389-393
Publication status	Published - 2012
Event	7th International Conference on MicroManufacturing 2012 - Northwestern University, Evanston, United States Duration: 12 Mar 2012 → 14 Mar 2012 Conference number: 7

Conference

Conference	7th International Conference on MicroManufacturing 2012
Number	7
Location	Northwestern University
Country/Territory	United States
City	Evanston
Period	12/03/2012 → 14/03/2012

Cite this

@inproceedings{00fea8dc3f384002b41c3eb6a97519cd,

title = "Demoulding force in micro-injection moulding",

abstract = "The paper reports an experimental study that investigates part demoulding behavior in micro injection moulding (MIM) with a focus on the effects of pressure (P) and temperature (T) on the demoulding forces. Demoulding of a microfluidics part is conducted and the four processing parameters of melt temperature (Tb), mould temperature (Tm), holding pressure (Ph) and injection speed (Vi) are analysed. The result using different combinations of process parameters were used to identify the best processing conditions in regards to demoulding forces when moulding micro parts.",

author = "C.A. Griffiths and S.S. Dimov and S. Scholz and Guido Tosello and A. Rees",

year = "2012",

language = "English",

pages = "389--393",

booktitle = "Proceedings of the 7th International Conference on Micro Manufacturing",

note = "7th International Conference on MicroManufacturing 2012, ICOMM 2012 ; Conference date: 12-03-2012 Through 14-03-2012",

}

TY - GEN

T1 - Demoulding force in micro-injection moulding

AU - Griffiths, C.A.

AU - Dimov, S.S.

AU - Scholz, S.

AU - Tosello, Guido

AU - Rees, A.

N1 - Conference code: 7

PY - 2012

Y1 - 2012

N2 - The paper reports an experimental study that investigates part demoulding behavior in micro injection moulding (MIM) with a focus on the effects of pressure (P) and temperature (T) on the demoulding forces. Demoulding of a microfluidics part is conducted and the four processing parameters of melt temperature (Tb), mould temperature (Tm), holding pressure (Ph) and injection speed (Vi) are analysed. The result using different combinations of process parameters were used to identify the best processing conditions in regards to demoulding forces when moulding micro parts.

AB - The paper reports an experimental study that investigates part demoulding behavior in micro injection moulding (MIM) with a focus on the effects of pressure (P) and temperature (T) on the demoulding forces. Demoulding of a microfluidics part is conducted and the four processing parameters of melt temperature (Tb), mould temperature (Tm), holding pressure (Ph) and injection speed (Vi) are analysed. The result using different combinations of process parameters were used to identify the best processing conditions in regards to demoulding forces when moulding micro parts.

M3 - Article in proceedings

SP - 389

EP - 393

BT - Proceedings of the 7th International Conference on Micro Manufacturing

T2 - 7th International Conference on MicroManufacturing 2012

Y2 - 12 March 2012 through 14 March 2012

ER -

Demoulding force in micro-injection moulding

Abstract

Conference

Fingerprint

Cite this