Skip to main navigation Skip to search Skip to main content

Demonstration-scale CO2 capture and liquefaction at the Amager Bakke waste-to-energy facility with monoethanolamine, Part one: Efficiency, CO2 purity, and emission control

  • Ebbe Hauge Jensen*
  • , Peter Volsing Rahbek
  • , Søren Jensen
  • , Jannik Kappel
  • , Jens Kristian Jørsboe
  • , Isaac Appelquist Løge
  • , Jonas Nedenskov
  • , Christian Riber
  • , Brian Elmegaard
  • , Philip Loldrup Fosbøl
  • *Corresponding author for this work
  • Amager Ressourcecenter
  • Pentair Union Engineering A/S
  • Rambøll Denmark

Research output: Contribution to journal › Journal article › Research › peer-review

65 Downloads (Orbit)

Abstract

The integration of CO2 capture at waste-to-energy (WtE) facilities can provide carbon-neutral electricity and district heating, and treat residual waste streams. However, before full-scale implementation, a better understanding of the production of liquid CO2 and emissions from the capture process is required. This study investigates the performance of a CO2 capture demonstration-scale unit, including CO2 liquefaction at the Amager Bakke WtE facility, covering topics including efficiencies, CO2 purity, and emission control. The demonstration unit has a capacity of 4 t CO2/d and is capable of capturing and conditioning CO2 to food-grade-compliant purity for utilisation by local consumers. The unit was operated for five months, using 35 wt.% monoethanolamine (MEA) solvent. During the five months of operation, seven experimental campaigns with different objectives were conducted to optimise energy performance, evaluate flue-gas emissions, and monitor the quality of the produced CO2. Across 2 002 h of on-stream time the specific reboiler duty (SRD) averaged 3.73–4.18 GJ/t CO2, fully consistent with the best values reported for 30–35 wt.% MEA systems. Production of liquid CO2 totalled 193 t, corresponding to an 84 % overall recovery, while a 12 % loss was observed between absorber and storage tank. The specific solvent consumption was 2.43 kg MEA/t CO2. The most significant contributor to solvent loss was oxidative degradation to NH3. The NH3 slip averaged 78 ppmv and showed a positive correlation with both absorber temperature and dissolved-iron level (up to 600 mg/L). Additionally, the effect of thermal reclaiming is qualitatively reported. Finally, the purity of the produced liquid CO2 for export was measured and compared with the degradation of the solvent. The CO2 product met Northern Lights transport limits and EIGA beverage-grade specifications; typical impurities were < 1 ppmv O2, <3 ppmv H2O, and <1 ppmv NO2. High-purity liquid CO2 was produced, with impurity levels in compliance with commercial CO2 specifications. However, significant challenges related to amine degradation were identified that must be solved before full-scale implementation.
Original languageEnglish
Article number167465
JournalChemical Engineering Journal
Volume524
Number of pages25
ISSN1385-8947
DOIs
Publication statusPublished - 2025

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • CO capture
  • Monoethanolamine
  • Amine emissions
  • Solvent degradation
  • CO impurities

Fingerprint

Dive into the research topics of 'Demonstration-scale CO2 capture and liquefaction at the Amager Bakke waste-to-energy facility with monoethanolamine, Part one: Efficiency, CO2 purity, and emission control'. Together they form a unique fingerprint.

Cite this