Cross Shear Roll Bonding

Niels Bay; Henrik Bjerregaard; Søren. B Petersen; C. H. G dos Santos

doi:10.1016/0924-0136(94)90309-3

Cross Shear Roll Bonding

Niels Bay, Henrik Bjerregaard, Søren. B Petersen, C. H. G dos Santos

Research output: Contribution to journal › Conference article › Research › peer-review

Abstract

The present paper describes an investigation of roll bonding an AlZn alloy to mild steel. Application of cross shear roll bonding, where the two equal sized rolls run with different peripheral speed, is shown to give better bond strength than conventional roll bonding. Improvements of up to 20-23% in bond strength are found and full bond strength is obtained at a reduction of 50% whereas 65% is required in case of conventional roll bonding. Pseudo cross shear roll bonding, where the cross shear effect is obtained by running two equal sized rolls with different speed, gives the same results.

Original language	English
Journal	Journal of Materials Processing Technology
Volume	45
Issue number	1-4
Pages (from-to)	1-6
ISSN	0924-0136
DOIs	https://doi.org/10.1016/0924-0136(94)90309-3
Publication status	Published - Sept 1994
Event	5th International Conference on Metal Forming - University of Birmingham, Birmingham, United Kingdom Duration: 13 Sept 1994 → 14 Sept 1994 Conference number: 5

Conference

Conference	5th International Conference on Metal Forming
Number	5
Location	University of Birmingham
Country/Territory	United Kingdom
City	Birmingham
Period	13/09/1994 → 14/09/1994

Access to Document

10.1016/0924-0136(94)90309-3

OpenUrl availability

Full text

Cite this

@inproceedings{65b438c48d774e0dafc22e694cda29b5,

title = "Cross Shear Roll Bonding",

abstract = "The present paper describes an investigation of roll bonding an AlZn alloy to mild steel. Application of cross shear roll bonding, where the two equal sized rolls run with different peripheral speed, is shown to give better bond strength than conventional roll bonding. Improvements of up to 20-23% in bond strength are found and full bond strength is obtained at a reduction of 50% whereas 65% is required in case of conventional roll bonding. Pseudo cross shear roll bonding, where the cross shear effect is obtained by running two equal sized rolls with different speed, gives the same results. ",

keywords = "Materialer til strukturelle form{\aa}l",

author = "Niels Bay and Henrik Bjerregaard and Petersen, {S{\o}ren. B} and {dos Santos}, {C. H. G}",

year = "1994",

month = sep,

doi = "10.1016/0924-0136(94)90309-3",

language = "English",

volume = "45",

pages = "1--6",

journal = "Journal of Materials Processing Technology",

issn = "0924-0136",

publisher = "Elsevier",

number = "1-4",

note = "5th International Conference on Metal Forming, Metal Forming 94 ; Conference date: 13-09-1994 Through 14-09-1994",

}

TY - GEN

T1 - Cross Shear Roll Bonding

AU - Bay, Niels

AU - Bjerregaard, Henrik

AU - Petersen, Søren. B

AU - dos Santos, C. H. G

N1 - Conference code: 5

PY - 1994/9

Y1 - 1994/9

N2 - The present paper describes an investigation of roll bonding an AlZn alloy to mild steel. Application of cross shear roll bonding, where the two equal sized rolls run with different peripheral speed, is shown to give better bond strength than conventional roll bonding. Improvements of up to 20-23% in bond strength are found and full bond strength is obtained at a reduction of 50% whereas 65% is required in case of conventional roll bonding. Pseudo cross shear roll bonding, where the cross shear effect is obtained by running two equal sized rolls with different speed, gives the same results.

AB - The present paper describes an investigation of roll bonding an AlZn alloy to mild steel. Application of cross shear roll bonding, where the two equal sized rolls run with different peripheral speed, is shown to give better bond strength than conventional roll bonding. Improvements of up to 20-23% in bond strength are found and full bond strength is obtained at a reduction of 50% whereas 65% is required in case of conventional roll bonding. Pseudo cross shear roll bonding, where the cross shear effect is obtained by running two equal sized rolls with different speed, gives the same results.

KW - Materialer til strukturelle formål

U2 - 10.1016/0924-0136(94)90309-3

DO - 10.1016/0924-0136(94)90309-3

M3 - Conference article

SN - 0924-0136

VL - 45

SP - 1

EP - 6

JO - Journal of Materials Processing Technology

JF - Journal of Materials Processing Technology

IS - 1-4

T2 - 5th International Conference on Metal Forming

Y2 - 13 September 1994 through 14 September 1994

ER -

Cross Shear Roll Bonding

Abstract

Conference

Access to Document

OpenUrl availability

Fingerprint

Cite this