Cost estimation of a specifically designed direct light processing (DLP) additive manufacturing machine for precision printing

Alessandro Charalambis; Ali Davoudinejad; Guido Tosello; David Bue Pedersen

Cost estimation of a specifically designed direct light processing (DLP) additive manufacturing machine for precision printing

Alessandro Charalambis
, Ali Davoudinejad
, Guido Tosello
, David Bue Pedersen

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

811 Downloads (Orbit)

Abstract

Additive Manufacturing (AM) refers to a portfolio of novel manufacturing technologies based on a layer-by-layer fabrication method.The market and industrial application of additive manufacturing technologies as an established manufacturing process have increasedexponentially in the last years creating new opportunities for manufacturers in a variety of industrial sectors. AM is an essentialprototyping technique for product design and development that is used in many different fields. However, the suitability of AMapplications in actual production in an industrial context needs to be determined. This study, presents a cost estimation model forprecision printing with a specifically designed Digital Light Processing (DLP) AM machine built and validated at the Technical Universityof Denmark. The model presented in this study can be easily adapted and applied to estimate within a high level of confidence thecost of any part manufactured with the mentioned 3D printing technology.

Original language	English
Title of host publication	Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology
Number of pages	4
Publisher	The European Society for Precision Engineering and Nanotechnology
Publication date	2017
ISBN (Electronic)	978-0-9957751-0-7
Publication status	Published - 2017
Event	euspen’s 17th International Conference & Exhibition - Hannover Congress Centre, Hannover, Germany Duration: 29 May 2017 → 2 Jun 2017

Conference

Conference	euspen’s 17th International Conference & Exhibition
Location	Hannover Congress Centre
Country/Territory	Germany
City	Hannover
Period	29/05/2017 → 02/06/2017

Keywords

Additive manufacturing
Cost estimation
Digital light processing
Precision printing

Access to Document

Full textAccepted author manuscript, 856 KB

OpenUrl availability

Check availability in DTU Findit

Cite this

Charalambis, A., Davoudinejad, A., Tosello, G., & Pedersen, D. B. (2017). Cost estimation of a specifically designed direct light processing (DLP) additive manufacturing machine for precision printing. In Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology The European Society for Precision Engineering and Nanotechnology.

Charalambis, Alessandro ; Davoudinejad, Ali ; Tosello, Guido et al. / Cost estimation of a specifically designed direct light processing (DLP) additive manufacturing machine for precision printing. Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology. The European Society for Precision Engineering and Nanotechnology, 2017.

@inproceedings{7243f54f3e584ed0baaa5b4e7d2dfe16,

title = "Cost estimation of a specifically designed direct light processing (DLP) additive manufacturing machine for precision printing",

abstract = "Additive Manufacturing (AM) refers to a portfolio of novel manufacturing technologies based on a layer-by-layer fabrication method.The market and industrial application of additive manufacturing technologies as an established manufacturing process have increasedexponentially in the last years creating new opportunities for manufacturers in a variety of industrial sectors. AM is an essentialprototyping technique for product design and development that is used in many different fields. However, the suitability of AMapplications in actual production in an industrial context needs to be determined. This study, presents a cost estimation model forprecision printing with a specifically designed Digital Light Processing (DLP) AM machine built and validated at the Technical Universityof Denmark. The model presented in this study can be easily adapted and applied to estimate within a high level of confidence thecost of any part manufactured with the mentioned 3D printing technology.",

keywords = "Additive manufacturing, Cost estimation, Digital light processing, Precision printing",

author = "Alessandro Charalambis and Ali Davoudinejad and Guido Tosello and Pedersen, \{David Bue\}",

year = "2017",

language = "English",

booktitle = "Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology",

publisher = "The European Society for Precision Engineering and Nanotechnology",

note = "euspen{\textquoteright}s 17th International Conference \& Exhibition ; Conference date: 29-05-2017 Through 02-06-2017",

}

Charalambis, A, Davoudinejad, A, Tosello, G & Pedersen, DB 2017, Cost estimation of a specifically designed direct light processing (DLP) additive manufacturing machine for precision printing. in Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology. The European Society for Precision Engineering and Nanotechnology, euspen’s 17th International Conference & Exhibition, Hannover, Germany, 29/05/2017.

Cost estimation of a specifically designed direct light processing (DLP) additive manufacturing machine for precision printing. / Charalambis, Alessandro; Davoudinejad, Ali; Tosello, Guido et al.
Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology. The European Society for Precision Engineering and Nanotechnology, 2017.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

TY - GEN

T1 - Cost estimation of a specifically designed direct light processing (DLP) additive manufacturing machine for precision printing

AU - Charalambis, Alessandro

AU - Davoudinejad, Ali

AU - Tosello, Guido

AU - Pedersen, David Bue

PY - 2017

Y1 - 2017

N2 - Additive Manufacturing (AM) refers to a portfolio of novel manufacturing technologies based on a layer-by-layer fabrication method.The market and industrial application of additive manufacturing technologies as an established manufacturing process have increasedexponentially in the last years creating new opportunities for manufacturers in a variety of industrial sectors. AM is an essentialprototyping technique for product design and development that is used in many different fields. However, the suitability of AMapplications in actual production in an industrial context needs to be determined. This study, presents a cost estimation model forprecision printing with a specifically designed Digital Light Processing (DLP) AM machine built and validated at the Technical Universityof Denmark. The model presented in this study can be easily adapted and applied to estimate within a high level of confidence thecost of any part manufactured with the mentioned 3D printing technology.

AB - Additive Manufacturing (AM) refers to a portfolio of novel manufacturing technologies based on a layer-by-layer fabrication method.The market and industrial application of additive manufacturing technologies as an established manufacturing process have increasedexponentially in the last years creating new opportunities for manufacturers in a variety of industrial sectors. AM is an essentialprototyping technique for product design and development that is used in many different fields. However, the suitability of AMapplications in actual production in an industrial context needs to be determined. This study, presents a cost estimation model forprecision printing with a specifically designed Digital Light Processing (DLP) AM machine built and validated at the Technical Universityof Denmark. The model presented in this study can be easily adapted and applied to estimate within a high level of confidence thecost of any part manufactured with the mentioned 3D printing technology.

KW - Additive manufacturing

KW - Cost estimation

KW - Digital light processing

KW - Precision printing

M3 - Article in proceedings

BT - Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology

PB - The European Society for Precision Engineering and Nanotechnology

T2 - euspen’s 17th International Conference & Exhibition

Y2 - 29 May 2017 through 2 June 2017

ER -

Charalambis A, Davoudinejad A, Tosello G , Pedersen DB. Cost estimation of a specifically designed direct light processing (DLP) additive manufacturing machine for precision printing. In Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology. The European Society for Precision Engineering and Nanotechnology. 2017

Cost estimation of a specifically designed direct light processing (DLP) additive manufacturing machine for precision printing

Abstract

Conference

Keywords

Access to Document

OpenUrl availability

Fingerprint

Cite this