Corrosion protection of AA2024-T3 alloy by modified hybrid titania-containing sol-gel coatings

Research output: Contribution to journalJournal article – Annual report year: 2016Researchpeer-review

Without internal affiliation

  • Author: Yu, Feng

    University of Manchester

  • Author: Akid, Robert

    University of Manchester, United Kingdom

View graph of relations

In this study, a hybrid titania-containing sol-gel coating, designated the ‘standard system’, has beenmodified through additions of a co-polymer polyvinyl butyral (PVB), a conductive polymer polyaniline(PANI) and a corrosion resistant glass flake (GF) to investigate the influence of these pigments for thecorrosion protection of AA2024-T3 alloy. Electrochemical impedance spectroscopy (EIS) was conductedon these coatings during immersion in 3.5% NaCl solution. Results revealed that modification by PVB ina volume ratio of sol-gel/PVB = 4:1 can increase the resistance to electrolyte ingress of the sol-gel layer,whilst the PANI in agglomerate-type particles produced a chemically stable intermediate layer betweenthe coating and substrate. Additionally, physical barrier properties to water uptake are provided by themodification of the sol-gel with GF. Differential scanning calorimetry and thermogravimetry (DSC/TG)analysis and water contact angle measurements indicated that GF increases the thermal stability and decreases the hydrophobicity. Both properties are improved by modification of PANI and reduced byaddition of PVB. Cross-hatch adhesion tests showed high adhesion strength between all the coatings on AA2024-T3 alloy. Fourier transformed infrared spectroscopy (FTIR) analysis suggested that PVB affected the condensation reactions taking place during the sol-gel synthesis.
Original languageEnglish
JournalProgress in Organic Coatings
Volume102
Pages (from-to)120-129
Number of pages10
ISSN0300-9440
DOIs
Publication statusPublished - 2017
Externally publishedYes
CitationsWeb of Science® Times Cited: No match on DOI

ID: 127709047