Controller reconfiguration based on LTR design

Hans Henrik Niemann, J. Stoustrup

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedingsResearchpeer-review

171 Downloads (Pure)

Abstract

Design of controller reconfiguration (CR) for systems with sensor faults are considered in this paper. One way to accommodate a failing sensor, is by replacing it by an observer based on the remaining outputs. A similar approach can be applied for a faulty actuator by duality. By including observers in the loop to replace faulty components, the nominal feedback controller does not need to be redesigned. The CR observer design problem for the faulty sensors or actuators can be rewritten into a standard loop transfer recovery (LTR) design problem, to which standard LTR design methods can be applied. Finally, it is shown that this CR architecture, where an CR observer is included in the feedback loop in between the system and the nominal controller, can be transformed into a more general fault tolerant controller (FTC) architecture based on the Youla parameterization.
Original languageEnglish
Title of host publicationProceedings of the 42nd IEEE Conference on Decision and Control
Volume3
PublisherIEEE
Publication date2003
ISBN (Print)0-7803-7924-1
DOIs
Publication statusPublished - 2003
Event42nd IEEE Conference on Decision and Control -
Duration: 1 Jan 2003 → …

Conference

Conference42nd IEEE Conference on Decision and Control
Period01/01/2003 → …

Bibliographical note

Copyright: 2003 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE

Cite this