Combined short and long term heat storage with Sodium Acetat Trihydrate in cylindrical tanks

Research output: Contribution to conferenceConference abstract for conference – Annual report year: 2018Researchpeer-review

Documents

View graph of relations

A cylindrical heat storage prototype was designed to utilize Sodium Acetate Trihydrate (SAT) for combined short and long term heat storage. It was manufactured with inexpensive standard components of water stores. It contained 150 liter of SAT composite and 55 l of water. A heat storage test facility was used to investigate if the concept of stable supercooling of SAT can be applied and if thermal power during discharge is sufficient for domestic heat supply. Preliminary results showed that 27 kWh of heat can be stored during heat up to 90°C, which is significantly higher than water heat stores of the same volume. After a heat loss free storage period, 11 kWh (long term storage potential) were discharged during SAT composite solidification. Parallel application of heat storage units should be investigated to overcome heat transfer limitations.
Original languageEnglish
Publication date2018
Publication statusPublished - 2018
EventEuroSun 2018: 12th International Conference on Solar Energy for Buildings and Industry - Raperswil, Switzerland
Duration: 10 Sep 201813 Sep 2018

Conference

ConferenceEuroSun 2018
LocationRaperswil
CountrySwitzerland
Period10/09/201813/09/2018

    Research areas

  • Heat storage design, Sodium Acetate Trihydrate, Stable Supercooling, Performance evaluation

Download statistics

No data available

ID: 162635126