Characterization and Evaluation of 600 V Range Devices for Active Power Factor Correction in Boundary and Continuous Conduction Modes

Juan Carlos Hernandez Botella; Lars Press Petersen; Michael A. E. Andersen

doi:10.1109/APEC.2015.7104607

Characterization and Evaluation of 600 V Range Devices for Active Power Factor Correction in Boundary and Continuous Conduction Modes

Juan Carlos Hernandez Botella
, Lars Press Petersen
, Michael A. E. Andersen

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

562 Downloads (Orbit)

Abstract

Traditional characterization of semiconductors switching dynamics is performed based on clamped inductive load measurements using the double pulse tester (DPT) configuration. This approach is valid for converters operating in continuous conduction mode (CCM), however in boundary conduction mode (BCM), if valley switching detection is used, the amount of energy recovered from the semiconductor output capacitance and the converter switching frequency need to be accurately calculated. This paper presents a characterization and evaluation procedure for conventional power factor correction circuits operating in CCM and BCM.

Original language	English
Title of host publication	Proceedings of IEEE Applied Power Electronics Conference and Exposition - APEC 2015
Publisher	IEEE
Publication date	2015
Pages	1911-1916
ISBN (Print)	978-1-4799-6735-3
DOIs	https://doi.org/10.1109/APEC.2015.7104607
Publication status	Published - 2015
Event	30th Applied Power Electronics Conference and Exposition - Charlotte Convention Center, Charlotte, United States Duration: 15 Mar 2015 → 19 Mar 2015

Conference

Conference	30th Applied Power Electronics Conference and Exposition
Location	Charlotte Convention Center
Country/Territory	United States
City	Charlotte
Period	15/03/2015 → 19/03/2015

Keywords

Power Factor Correction
Continuous
Boundary
Characterization
Evaluation

Access to Document

10.1109/APEC.2015.7104607

Characterization and Evaluation of 600 V Range Devices for Active Power Factor Correction in Boundary and Continuous Conduction ModesAccepted author manuscript, 657 KB

OpenUrl availability

Check availability in DTU Findit

Cite this

@inproceedings{024c75929f03419c8b813300002c4a90,

title = "Characterization and Evaluation of 600 V Range Devices for Active Power Factor Correction in Boundary and Continuous Conduction Modes",

abstract = "Traditional characterization of semiconductors switching dynamics is performed based on clamped inductive load measurements using the double pulse tester (DPT) configuration. This approach is valid for converters operating in continuous conduction mode (CCM), however in boundary conduction mode (BCM), if valley switching detection is used, the amount of energy recovered from the semiconductor output capacitance and the converter switching frequency need to be accurately calculated. This paper presents a characterization and evaluation procedure for conventional power factor correction circuits operating in CCM and BCM.",

keywords = "Power Factor Correction, Continuous, Boundary, Characterization, Evaluation",

author = "\{Hernandez Botella\}, \{Juan Carlos\} and Petersen, \{Lars Press\} and Andersen, \{Michael A. E.\}",

year = "2015",

doi = "10.1109/APEC.2015.7104607",

language = "English",

isbn = "978-1-4799-6735-3",

pages = "1911--1916",

booktitle = "Proceedings of IEEE Applied Power Electronics Conference and Exposition - APEC 2015",

publisher = "IEEE",

address = "United States",

note = "30th Applied Power Electronics Conference and Exposition, APEC 2015 ; Conference date: 15-03-2015 Through 19-03-2015",

}

Hernandez Botella, JC, Petersen, LP & Andersen, MAE 2015, Characterization and Evaluation of 600 V Range Devices for Active Power Factor Correction in Boundary and Continuous Conduction Modes. in Proceedings of IEEE Applied Power Electronics Conference and Exposition - APEC 2015. IEEE, pp. 1911-1916, 30th Applied Power Electronics Conference and Exposition, Charlotte, North Carolina, United States, 15/03/2015. https://doi.org/10.1109/APEC.2015.7104607

Characterization and Evaluation of 600 V Range Devices for Active Power Factor Correction in Boundary and Continuous Conduction Modes. / Hernandez Botella, Juan Carlos; Petersen, Lars Press; Andersen, Michael A. E.
Proceedings of IEEE Applied Power Electronics Conference and Exposition - APEC 2015. IEEE, 2015. p. 1911-1916.

Research output: Chapter in Book/Report/Conference proceeding › Article in proceedings › Research › peer-review

TY - GEN

T1 - Characterization and Evaluation of 600 V Range Devices for Active Power Factor Correction in Boundary and Continuous Conduction Modes

AU - Hernandez Botella, Juan Carlos

AU - Petersen, Lars Press

AU - Andersen, Michael A. E.

PY - 2015

Y1 - 2015

N2 - Traditional characterization of semiconductors switching dynamics is performed based on clamped inductive load measurements using the double pulse tester (DPT) configuration. This approach is valid for converters operating in continuous conduction mode (CCM), however in boundary conduction mode (BCM), if valley switching detection is used, the amount of energy recovered from the semiconductor output capacitance and the converter switching frequency need to be accurately calculated. This paper presents a characterization and evaluation procedure for conventional power factor correction circuits operating in CCM and BCM.

AB - Traditional characterization of semiconductors switching dynamics is performed based on clamped inductive load measurements using the double pulse tester (DPT) configuration. This approach is valid for converters operating in continuous conduction mode (CCM), however in boundary conduction mode (BCM), if valley switching detection is used, the amount of energy recovered from the semiconductor output capacitance and the converter switching frequency need to be accurately calculated. This paper presents a characterization and evaluation procedure for conventional power factor correction circuits operating in CCM and BCM.

KW - Power Factor Correction

KW - Continuous

KW - Boundary

KW - Characterization

KW - Evaluation

U2 - 10.1109/APEC.2015.7104607

DO - 10.1109/APEC.2015.7104607

M3 - Article in proceedings

SN - 978-1-4799-6735-3

SP - 1911

EP - 1916

BT - Proceedings of IEEE Applied Power Electronics Conference and Exposition - APEC 2015

PB - IEEE

T2 - 30th Applied Power Electronics Conference and Exposition

Y2 - 15 March 2015 through 19 March 2015

ER -

Characterization and Evaluation of 600 V Range Devices for Active Power Factor Correction in Boundary and Continuous Conduction Modes

Abstract

Conference

Keywords

Access to Document

OpenUrl availability

Fingerprint

Cite this