Can We Trust Real Time Measurements of Lung Deposited Surface Area Concentrations in Dust from Powder Nanomaterials?

Marcus Levin, Olivier Witschger, Sebastien Bau, Elzbieta Jankowska, Ismo K. Koponen, Antti J. Koivisto, Per A. Clausen, Alexander Jensen, Kristian Mølhave, Christof Asbach, Keld A. Jensen

    Research output: Contribution to journalJournal articleResearchpeer-review

    251 Downloads (Pure)

    Abstract

    A comparison between various methods for real-time measurements of lung deposited surface area (LDSA) using spherical particles and powder dust with specific surface area ranging from 0.03 to 112 m2 g-1 was conducted. LDSA concentrations measured directly using Nanoparticle Surface Area Monitor (NSAM) and Aerotrak and were compared to LDSA concentrations recalculated from size distribution measurements using Electrical Low Pressure Impactor (ELPI) and Fast Mobility Particle Sizer (FMPS). FMPS and ELPI measurements were also compared to dust surface area concentrations estimated from gravimetrical filter measurements and specific surface areas. Measurement of LDSA showed very good correlation in measurements of spherical particles (R2 > 0.97, Ratio 1.0 to 1.04). High surface area nanomaterial powders showed a fairly reliable correlation between NSAM and Aerotrak (R2 0.73-0.93) and a material-dependent offset in the ratios (1.04-2.8). However, the correlation and ratio were inconsistent for lower LDSA concentrations. Similar levels of correlation were observed for the NSAM and the FMPS for high surface area materials, but with the FMPS overestimating the LDSA concentration. The ELPI showed good correlation with NSAM data for high LDSA materials (R2 0.87-0.93), but not for lower LDSA concentrations (R2 0.50-0.72). Comparisons of respirable dust surface area from ELPI data correlated well (R2 > 0.98) with that calculated from filter samples, but materials-specific exceptions were present. We conclude that there is currently insufficient reliability and comparability between methods in the measurement of LDSA concentrations. Further development is required to enable use of LDSA for reliable dose metric and regulatory enforcement of exposure.
    Original languageEnglish
    JournalAerosol and Air Quality Research
    Volume16
    Issue number5
    Pages (from-to)1105-1117
    Number of pages13
    ISSN1680-8584
    DOIs
    Publication statusPublished - 2016

    Keywords

    • Lung deposited surface area
    • Exposure assessment
    • Aerosol measurement
    • Dustiness

    Fingerprint Dive into the research topics of 'Can We Trust Real Time Measurements of Lung Deposited Surface Area Concentrations in Dust from Powder Nanomaterials?'. Together they form a unique fingerprint.

    Cite this