Calibration of three Nacelle -based Lidars

Paula Gómez Arranz, Rozenn Wagner

Research output: Book/ReportReportResearch

Abstract

This report presents the result of the lidar calibration performed for three two-beam, continuous wave, nacelle based lidars at DTU’s test site Risø, Denmark. Calibration is here understood as the establishment of a relation between the reference wind speed measurements with measurement uncertainties provided by measurement standard and corresponding lidar wind speed indications with associated measurement uncertainties. The lidar calibration concerns the 10 minute mean wind speed measurements.
Original languageEnglish
PublisherDTU Wind Energy
Number of pages57
Publication statusPublished - 2017
SeriesDTU Wind Energy LC I
Number109

Bibliographical note

This is an internal report and therefore not available in full text. Please contact author's or director of author's department for further information.

Fingerprint Dive into the research topics of 'Calibration of three Nacelle -based Lidars'. Together they form a unique fingerprint.

Cite this