Calibration of surface roughness standards

R. Thalmann, A. Nicolet, F. Meli, G. B. Picotto, M. Matus, L. Carcedo, B. Hemming, O. Ganioglu, Leonardo De Chiffre, F. Saraiva, S. Bergstrand, S. Zelenika, A. Tonmueanwai, C.S. Tsai, W. Shihua, O. Kruger, M. M. de Souza, J. A. Salgado, Z. Ramotowski

Research output: Contribution to journalJournal articlepeer-review

2307 Downloads (Pure)

Abstract

The key comparison EURAMET.L-K8.2013 on roughness was carried out in the framework of a EURAMET project starting in 2013 and ending in 2015. It involved the participation of 17 National Metrology Institutes from Europe, Asia, South America and Africa representing four regional metrology organisations. Five surface texture standards of different type were circulated and on each of the standards several roughness parameters according to the standard ISO 4287 had to be determined. 32 out of 395 individual results were not consistent with the reference value. After some corrective actions the number of inconsistent results could be reduced to 20, which correspond to about 5% of the total and can statistically be expected. In addition to the material standards, two softgauges were circulated, which allow to test the software of the instruments used in the comparison. The comparison results help to support the calibraton and measurement capabilities (CMCs) of the laboratories involved in the CIPM MRA. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCL, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
Original languageEnglish
Article number04001
JournalMetrologia
Volume53
Issue number1A
Number of pages57
ISSN0026-1394
DOIs
Publication statusPublished - 2016

Fingerprint

Dive into the research topics of 'Calibration of surface roughness standards'. Together they form a unique fingerprint.

Cite this