Calibration of Scanning Lidar instrument

Rebeca Rivera Lamata*, Paula Gómez Arranz*

*Corresponding author for this work

Research output: Book/ReportReportResearch

Abstract

This report describes the tests carried out on a scanning lidar at the DTU Test Station for large wind turbines, Østerild. The tests were divided in two parts. In the first part, the purpose was to obtain wind speed calibration at a defined height against one cup anemometers mounted on a mast both in terms of horizontal and line of sight (LOS) wind speed. Additionally, comparison of wind direction and turbulence measurements were made, for informative purposes, although they are not formally considered calibrations. In the second part, we performed the calibration of the inclinometers and the check of the positional accuracy of the scanner head.
Original languageEnglish
Number of pages48
Publication statusPublished - 2021
SeriesDTU Wind Energy LC I
NumberI-202(EN)-R0

Bibliographical note

This is an internal report and therefore not available in full text. Please contact author's or director of author's department for further information.

Fingerprint

Dive into the research topics of 'Calibration of Scanning Lidar instrument'. Together they form a unique fingerprint.

Cite this