TY - RPRT
T1 - Calibration of Scanning Lidar instrument
AU - Vignaroli, Andrea
AU - Rivera Lamata, Rebeca
N1 - This is an internal report and therefore not available in full text. Please contact author's or director of author's department for further information.
PY - 2021
Y1 - 2021
N2 - This report describes the tests carried out on a scanning lidar at the DTU Test Station for large wind turbines, Østerild. The tests were divided in two parts. In the first part, the purpose was to obtain wind speed calibration at a defined height against one cup anemometers mounted on a mast both in terms of horizontal and line of sight (LOS) wind speed. Additionally, comparison of wind direction and turbulence measurements were made, for informative purposes, although they are not formally considered calibrations. In the second part, we performed the calibration of the inclinometers and the check of the positional accuracy of the scanner head.
AB - This report describes the tests carried out on a scanning lidar at the DTU Test Station for large wind turbines, Østerild. The tests were divided in two parts. In the first part, the purpose was to obtain wind speed calibration at a defined height against one cup anemometers mounted on a mast both in terms of horizontal and line of sight (LOS) wind speed. Additionally, comparison of wind direction and turbulence measurements were made, for informative purposes, although they are not formally considered calibrations. In the second part, we performed the calibration of the inclinometers and the check of the positional accuracy of the scanner head.
M3 - Report
T3 - DTU Wind Energy LC I
BT - Calibration of Scanning Lidar instrument
PB - DTU Wind Energy
CY - Risø, Roskilde, Denmark
ER -