Calibration of scanning Lidar

Research output: Book/ReportReportResearch


This report describes the tests carried out on a scanning lidar at the DTU Test Station for large wind turbines, Høvsøre. The tests were divided in two parts. In the first part, the purpose was to obtain wind speed calibrations at two heights against two cup anemometers mounted on a mast. Additionally, comparison of wind direction and wind shear measurements were made, for informative purposes, although they are not formally considered calibrations. In the second part, we performed the calibration of the inclinometers and the check of the positional accuracy of the scanner head.
Original languageEnglish
PublisherDTU Wind Energy
Number of pages42
Publication statusPublished - 2017
SeriesDTU Wind Energy LC I

Bibliographical note

This is an internal report and therefore not available in full text. Please contact author's or director of author's department for further information.

Cite this

Gómez Arranz, P., & Courtney, M. (2017). Calibration of scanning Lidar. DTU Wind Energy. DTU Wind Energy LC I, No. 108