Calibration of other type Ground-based Lidar

Research output: Book/ReportReportResearch


This report presents the result of a test of a ground-based lidar of other type. The test was performed at DTU’s test site for large wind turbines at Østerild, Denmark. The result as an establishment of a relation between the reference wind speed measurements with measurement uncertainties provided by measurement standard and corresponding lidar wind speed indications with associated measurement uncertainties. The comparison of the lidar measurements of the wind direction with that from the wind vanes is also given.
Original languageEnglish
PublisherDTU Wind Energy
Number of pages25
Publication statusPublished - 2019
SeriesDTU Wind Energy I
NumberLC I-145

Bibliographical note

This is an internal report and therefore not available in full text. Please contact author's or director of author's department for further information.


  • LC I-145

Cite this

Gómez Arranz, P., & Villanueva, H. (2019). Calibration of other type Ground-based Lidar. DTU Wind Energy. DTU Wind Energy I, No. LC I-145