This report presents the result of the comparison of the calibrations performed for the same lidar at DTU’s test sites. Calibration is here understood as the establishment of a relation between the reference wind speed measurements with measurement uncertainties provided by measurement standard and corresponding lidar wind speed indications with associated measurement uncertainties. The lidar calibration concerns the 10 minute mean wind speed measurements. The comparison of the lidar measurements of the wind direction with that from wind vanes measurements are given for information only. The purpose of this report is the comparison of calibration results of the same lidar unit in two calibration campaigns, at 2 separate test sites. For this purpose, only the results at 2 heights are presented.
|Publisher||DTU Wind Energy|
|Number of pages||30|
|Publication status||Published - 2017|
|Series||DTU Wind Energy LC I|
This is an internal report and therefore not available in full text. Please contact author's or director of author's department for further information.