Calibration of Nacelle-based Lidar instrument

Research output: Book/ReportReport

Abstract

This report presents the result of the lidar calibration performed for a two-beam nacelle based lidar at DTU’s test site for large wind turbines at Høvsøre, Denmark. Calibration is here understood as the establishment of a relation between the reference wind speed measurements with measurement uncertainties provided by measurement standard and corresponding lidar wind speed indications with associated measurement uncertainties. The lidar calibration concerns the 10 minute mean wind speed measurements.
Original languageEnglish
PublisherDTU Wind Energy
Number of pages28
Publication statusPublished - 2016
SeriesDTU Wind Energy LC I
Number086(EN)

Bibliographical note

This is an internal report and therefore not available in full text. Please contact author's or director of author's department for further information.

Keywords

  • DTU Wind Energy LC I-086(EN)
  • LC-I-086
  • LC-I-086(EN)

Cite this

Georgieva Yankova, G., & Courtney, M. (2016). Calibration of Nacelle-based Lidar instrument. DTU Wind Energy. DTU Wind Energy LC I, No. 086(EN)