Calibration of ground-based Lidar instrument WLS7-341

    Research output: Book/ReportReportResearch

    Abstract

    This report presents the result of the lidar calibration performed for the given WLS7 Windcube at DTU’s test site for large wind turbines at Høvsøre, Denmark. Calibration is here understood as the establishment of a relation between the reference wind speed measurements with measurement uncertainties provided by measurement standard and corresponding lidar wind speed indications with associated measurement uncertainties. The lidar calibration concerns the 10 minute mean wind speed measurements. The comparison of the lidar measurements of the wind direction with that from wind vanes measurements are given for information only.
    Original languageEnglish
    PublisherDTU Wind Energy
    Number of pages29
    Publication statusPublished - 2014
    SeriesDTU Wind Energy LC I
    Number047(EN)

    Bibliographical note

    This is an internal report and therefore not available in full text. Please contact author's or director of author's institute for further information.

    Keywords

    • DTU Wind Energy LC I-047(EN)
    • LC-I-047
    • LC-I-047(EN)

    Fingerprint

    Dive into the research topics of 'Calibration of ground-based Lidar instrument WLS7-341'. Together they form a unique fingerprint.

    Cite this