Calibration of ground-based lidar instrument WLS7-151

Research output: Book/ReportReport

Abstract

This report presents the result of the lidar calibration performed for the given WLS7 Windcube at DTU’s test site for large wind turbine at Høvsøre, Denmark. Calibration is here understood as the establishment of a relation between the reference wind speed measurements with measurement uncertainties provided by measurement standard and corresponding lidar wind speed indications with associated measurement uncertainties. The lidar calibration concerns the 10 minute mean wind speed measurements. The comparison of the lidar measurements of the wind direction with that from wind vanes measurements are given for information only.
Original languageEnglish
PublisherDTU Wind Energy
Number of pages28
Publication statusPublished - 2011
SeriesDTU Wind Energy LC I
Number001

Bibliographical note

This is an internal report and therefore not available in full text. Please contact author's or director of author's institute for further information.

Keywords

  • DTU Wind Energy LC I-001(EN)
  • LC-I-001
  • LC-I-001(EN)

Cite this

Gómez Arranz, P., & Wagner, R. (2011). Calibration of ground-based lidar instrument WLS7-151. DTU Wind Energy. DTU Wind Energy LC I, No. 001