Calibration of Ground -based Lidar instrument

Research output: Book/ReportReport


This report presents the result of the lidar calibration performed for the given Ground-based Lidar at DTU’s test site for large wind turbines at Høvsøre, Denmark. Calibration is here understood as the establishment of a relation between the reference wind speed measurements with measurement uncertainties provided by measurement standard and corresponding lidar wind speed indications with associated measurement uncertainties. The lidar calibration concerns the 10 minute mean wind speed measurements. The comparison of the lidar measurements of the wind direction with that from wind vanes measurements are given for information only.
Original languageEnglish
PublisherDTU Wind Energy
Number of pages29
Publication statusPublished - 2015
SeriesDTU Wind Energy LC I

Bibliographical note

This is an internal report and therefore not available in full text. Please contact author's or director of author's department for further information.


  • DTU Wind Energy LC I-085(EN)
  • LC-I-085
  • LC-I-085(EN)

Cite this

Villanueva, H., & Georgieva Yankova, G. (2015). Calibration of Ground -based Lidar instrument. DTU Wind Energy. DTU Wind Energy LC I, No. 085(EN)