Broadband Packaging of Photodetectors for 100 Gb/s Ethernet Applications

Research output: Contribution to journalJournal article – Annual report year: 2013Researchpeer-review

View graph of relations

The packing structure of functional modules is a major limitaion in achieving a desired performance for 100 Gb/s ethernet applications. This paper presents a methodology of developing advanced packaging of photodetectors (PDs) for high-speed data transmission applications by using 3-D electromagnetic (EM) simulations. A simplified model of the PD module is first used to analyze and optimize packaging structures and propose an optimal packaging design based on the simplified model. Although a PD module with improved performance proved the success of the optimal packaging design, the simplified model could not identify other important bandwidth limitation effects. Therefore, a full 3-D EM model of PD modules is developed to predict the optical-to-electrical response of the module, and with this model, it is possible to identify a critical mode mismatch effect as another important factor of limiting the bandwidth of PD modules. After eliminating the mode mismatch effect by improving the chip-conductor-backed coplanar waveguide transition, a final optimal packaging structure is implemented for the PD module with reduced attenuation up to 100 GHz and a broader 3-dB bandwidth of more than 90 GHz. Furthermore, the PD module exhibits excellent performance under the high-speed data-transmission experiment with 107 Gb/s data rate.
Original languageEnglish
JournalI E E E Transactions on Components, Packaging and Manufacturing Technology
Volume3
Issue number3
Pages (from-to)422-429
ISSN2156-3950
DOIs
Publication statusPublished - 2013
CitationsWeb of Science® Times Cited: No match on DOI

    Research areas

  • 3-D electromagnetic (EM) modeling, 3-dB bandwidth, Mode mismatch, Packaging, Photodetector (PD)

ID: 53041845