Bonding mechanisms in spot welded three layer combinations

Research output: Chapter in Book/Report/Conference proceedingArticle in proceedings – Annual report year: 2016Researchpeer-review

View graph of relations

The strength of a spot weld generally stems from fusion bonding of the metal layers, but other solid state bonding mechanisms also contribute to the overall strength. Metallographic analyses are presented to identify the phases formed near and across the weld interfaces and to identify the occurring bonding mechanisms. When welding a combination of three galvanized steel layers where one outer layer is a thin low-carbon steel it is a common challenge to obtain nugget penetration into the thin low-carbon steel. It therefore happens in real production that no nugget is formed across this interface. It has been shown previously that such a joint can reach relatively high strength resulting in plug failure in tensileshear testing. Additional strength due to these bonding mechanisms is also obtained in common spot welds in the so-called corona band around the weld nugget.
Original languageEnglish
Title of host publicationProceedings of 9th International Seminar & Conference on Advances in Resistance Welding
Number of pages12
Publication date2016
Publication statusPublished - 2016
Event9th International Seminar & Conference on Advances in Resistance Welding - Miami, FL, United States
Duration: 13 Apr 201615 Apr 2016

Conference

Conference9th International Seminar & Conference on Advances in Resistance Welding
CountryUnited States
CityMiami, FL
Period13/04/201615/04/2016

ID: 123574139