Blade research and demonstration platform

Philipp U. Haselbach*, Frederik Zahle, Peter Berring, Sergei Semenov, Laura Voltá, David Robert Verelst

*Corresponding author for this work

Research output: Contribution to journalConference articleResearchpeer-review

92 Downloads (Pure)

Abstract

At DTU Wind Energy, a 12.6 m reference wind turbine rotor blade and the
corresponding blade moulds were designed and manufactured. The entire blade design and the related test data will be published according to the FAIR principles. The blade moulds are intended to serve as a blade research and demonstration platform, allowing to realise theoretical concepts and testing these in full-scale on a wind turbine blade and thus enabling a comparison to numerical solutions. In this article, the preliminary blade design progress and process, initial load calculations and a 3D scan of the blade molds are presented.
Original languageEnglish
Article number052073
Book seriesJournal of Physics: Conference Series
Number of pages11
ISSN1742-6596
DOIs
Publication statusPublished - 2020
EventTORQUE 2020 - Online event, Netherlands
Duration: 28 Sep 20202 Oct 2020
https://www.torque2020.org/

Conference

ConferenceTORQUE 2020
LocationOnline event
Country/TerritoryNetherlands
Period28/09/202002/10/2020
Internet address

Fingerprint

Dive into the research topics of 'Blade research and demonstration platform'. Together they form a unique fingerprint.

Cite this